NETGEAR RN12P0610 - ReadyNAS 3200 Hardware Manual page 28

ReadyNAS 3200 Hardware Manual
RAIDar shows that the system is initializing the volume.
Figure 2-4
The system powers down when the volume initialization completes.
9. Power the system on. It will perform diagnostics while it boots.
10. Click Rescan in RAIDar to connect to the system.
Figure 2-5
RAIDar will find the system and show that it is booting.
11. When RAIDar shows that the system is ready, select the system from the list, and click Setup
to log in to FrontView and configure the system.
Figure 2-6
2-10
v1.1, July 2009
Diagnostics and Maintenance