Open Caveats - Cisco NSS4100 - Gigabit Storage System Release Note

Open Caveats

Release Notes for the Cisco NSS4000 and NSS6000 Series, Firmware Version 1. 1 6
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923)
• When the NSS is joined to an ADS domain and you upgrade the firmware,
the ADS is unable to access a share.
The workaround is to rejoin the NSS to the ADS domain. (CSCsw94409)
For more information about upgrading the firmware, see the
Administration Guide
These are the open caveats for this release. These caveats apply to both the
NSS4000 and NSS6000 unless otherwise specified.
• CSCsw86058
When the NSS is running over a network that is on a different subnet, a user
cannot mount a CIFS connection by using a hostname.
The workaround is to mount the CIFS connection by using an IP address.
• CSCsw86138
When an unexpected power cycle occurs on the NSS, the time might be
corrupted on the NSS. This only applies if the time is set manually, not by
using NTP.
When this occurs, a pop-up alert window appears when you access
Configuration GUI after the unexpected shutdown.
The workaround is to manually check the time in the GUI. From the Manager
Menu, click Admin
• CSCsw86187
If a data write operation is in progress, and the system power is interrupted,
data stored in a degraded RAID1 or RAID5 array might become
inaccessible. This is common to all NSS systems using software RAID
implementations.
These are the workarounds:
- Replace the failed drives in the degraded arrays as soon as possible, as
failed RAID arrays can result in complete loss of all user data.
available on Cisco.com.
Time and correct the time if necessary.
 
Release Notes
NSS4000/NSS6000
3