Downloading And Upgrading The Firmware - Cisco NSS2000 - Gigabit Storage System Chassis Release Notes

Release Notes

Downloading and Upgrading the Firmware

NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
NOTE
2
Although this feature is working, Cisco does not fully support joining the NSS to
the Windows Active Directory Server (ADS) in a Windows Server 2008
environment. This workaround only applies to a single user. (CSCsw93385)
This procedure describes how to upgrade the firmware on the NSS by using the
NSS Configuration graphical user interface (GUI).
Back up the system configuration file to a USB flash device and/or a RAID volume
by using the Configuration GUI before you upgrade the firmware. From the
Manager Menu, click Admin
To download and upgrade the NSS firmware:
Download the latest image from the Cisco support website to your local computer.
See http://www.cisco.com/support/index.shtml
downloading, do not unzip the file.
Base Model Firmware
NSS2000 NSS2000_fwupgrade_0116.tar.gz
Log into the Configuration GUI.
From the Manager Menu, click Admin
Click the Browse button and navigate to the
firmware upgrade image.
Click the Upgrade Firmware button.
Run this procedure again by repeating Steps 2 though 5.
Performing the upgrade twice allows the system to continue to operate properly
(when running the latest firmware), if a system failure occurs.
If you are moving drives between two NSS systems, make sure that both of the
systems are using the latest firmware and that the system configurations are saved
on USB memory sticks and/or a RAID volume.
• When the NSS is joined to an ADS domain and you upgrade the firmware,
the ADS is unable to access a share.
The workaround is to rejoin the NSS to the ADS domain. (CSCsw94409)
  Configuration to backup the file.
for further details. After
Maintenance.
 
NSSxxxx_fwupgrade_0116.tar.gz
Release Notes for the NSS2000 Series Firmware Version 1. 1 6