Table of Contents
Related Manuals for Smarthome SwitchLinc 2-Way 2381I
Summarization of Contents
Quick Start Guide
Initial Setup Procedures
Instructions for setting primary address, preset on-level, and fade-on rate.
System Reset and Scene Setup
Guide for performing a factory reset and programming scenes.
Using the SwitchLinc
Basic Operations
Details on manual operation of the SwitchLinc dimmer via the rocker.
Advanced Operations
Functions performed by double-tapping or triple-tapping the dimmer rocker.
Setting Device Addresses and Levels
Setting the Preset On-Level
Configuring the default brightness level when the dimmer is activated.
Setting the Fade-On Rate
Adjusting the speed at which the light brightens upon activation.
Advanced Programming Functions
Remote On-Level and Fade-On Rate Setup
Remotely configuring preset on-level and fade-on rate using a transmitter.
Scene Programming Details
Scene Membership and On-Levels
Setting scene-specific brightness levels for modules.
Scene Fade-on Rates
Adjusting fade-on rates for specific scenes.
Scene Management and Options
Removing SwitchLinc from a Scene
Procedure to remove a device from an existing scene.
PLC Transmission Control
Disable/Enable PLC Transmissions
Managing the device's ability to transmit PLC signals.
Programming Lockout
Manage Programming Lockout
Procedure to disable and re-enable programming features.
Other Features
Power Restore and Status Query
Details on power restore behavior and querying device status.
Helpful Tools for Automation
Diagnostic and Installation Tools
Tools like signal meters and testers for diagnosing issues and installation.
Limited Warranty Information
Warranty Limitations and Disclaimers
Details on warranty coverage, exclusions, and liability limits.
Need help?
Do you have a question about the SwitchLinc 2-Way 2381I and is the answer not in the manual?
Questions and answers