2380w switchlinc 2-way 600-watt in white 2380i switchlinc 2-way 600-watt in ivory 2381w switchlinc 2-way 1000-watt in white 2381i switchlinc 2-way 1000-watt in ivory remote control dimmer and transmitter (17 pages)
About X10 Lamp Dimmer ........................... 3 Features & Benefits ........................... 3 What’s in the Box?............................. 3 Getting Started ............................3 Setting the X10 Address..........................4 Removing the X10 Address........................4 Advanced Features ............................. 4 Setting the On-Level..........................4 Factory Reset ............................4 Specifications..............................
Simply plug X10 Lamp Dimmer into a wall outlet and connect the desired lamp. Program an X10 address to X10 Lamp Dimmer in seconds and you'll be able to use an X10 controller to turn the connected device on, off, dim and bright.
1) Plug the lamp or device (also called the load) you want to control into the outlet on the bottom of X10 Lamp Dimmer 2) Plug X10 Lamp Dimmer into an unswitched outlet X10 Lamp Dimmer’s LED and the load will turn on Setting the X10 Address 1) Press &...
Problem Possible Cause Solution X10 Lamp Dimmer’s X10 Lamp Dimmer may Make sure X10 Lamp Dimmer is not plugged into a Status LED is not not be getting power. switched outlet that is turned off. turning on. The load is not being...