Table of Contents
Related Manuals for Smarthome SwitchLinc 2-Way 2380I
Summarization of Contents
SwitchLinc Key Features
2-Way Communications
Describes two-way powerline communication for remote control and feedback.
Scene-Ready Operation
Allows control of lighting scenes and home automation events.
Non-Volatile Memory
Settings are retained without code wheels, ensuring persistent configuration.
Tactile Rocker Action
Features a tactile rocker switch for intuitive on/off and dimming control.
LED Brightness Indicator
An 8-level LED bar visually displays the current brightness level.
Status LED and Set Button
Indicates powerline activity and facilitates programming.
Quick Start Installation Guide
Setting Primary Address
Configure the unique address for the dimmer to communicate on the powerline.
Setting Preset On-Level
Define the default brightness level when the dimmer is turned on.
Setting Fade-On Rate
Adjust the speed at which the light gradually turns on.
Factory Reset Procedure
Restore the dimmer to its original factory default settings.
Programming a Scene
Assign the dimmer to a specific lighting scene for coordinated control.
Installation Preparation and Safety
Installation Precautions
Essential steps and warnings before installing the dimmer switch.
Wiring Considerations
Details on neutral connections and wiring for multi-way setups.
SwitchLinc Basic and Advanced Operations
Basic Switch Operations
How to control lights using single taps and press-and-hold actions.
Advanced Switch Operations
Using double and triple taps for specific dimming functions.
Detailed Installation Steps
Disconnect Power
Ensure power is off at the breaker before beginning installation.
Wire Connections
Detailed guide on connecting wires for 2-way and multi-way setups.
Final Installation Steps
Restoring power and installing the faceplate after setup.
Dimmer Configuration and Settings
Detailed Primary Address Setup
Step-by-step guide to assign a unique PLC/X10 address.
Setting Preset On-Level
Define the default brightness level for immediate activation.
Customizing Fade-On Rate
Adjust the ramp speed for smooth light transitions.
Advanced Dimmer Configuration
Remote On-Level Programming
Set default brightness remotely using specific command sequences.
Remote Fade-On Rate Programming
Adjust light ramp speed remotely via command sequences.
Scene Address Programming
Assign the dimmer to up to 64 scenes for coordinated lighting control.
Scene Programming and Customization
Scene Membership and On-Levels
Configure scene-specific brightness levels and membership.
Scene Fade-on Rates
Set individual fade-on rates for each scene.
Scene Management and Control Options
Removing from a Scene
Detach the dimmer from a programmed lighting scene.
Disabling PLC Transmissions
Turn off the dimmer's ability to transmit PLC signals.
Enabling PLC Transmissions
Restore the dimmer's ability to transmit PLC signals.
Detailed Factory Reset
Comprehensive procedure to reset the dimmer to factory defaults.
Advanced Features and Powerline Signal Management
Programming Lockout
Prevent accidental changes to dimmer settings.
Power Restore Feature
Dimmer resumes last brightness after power loss.
Querying SwitchLinc Status
Check the dimmer's current state using automation interfaces.
Powerline Signal Travel
Explains how PLC signals move through a home's wiring.
Enhancing PLC Signal Reliability
Signal Loss Sources
Identifies common electronic devices that degrade PLC signal strength.
Signal Boosters and Filters
Recommends amplifiers and filters to enhance signal strength.
Tools and Tips for Installation
Recommended Tools
Lists essential tools like Maxi-Controller, Signal Meter, and Voltmeter.
New Construction Advice
Guidance on wiring, box types, and heat management for new installations.
Troubleshooting Common Issues
Unexpected Activation
Addresses issues where the light turns on by itself or fails to respond.
Programming and Transmission Issues
Solves problems with setting scenes, fade rates, or transmit failures.
Connectivity and Responsiveness
Fixes issues with LED visibility, responsiveness, and signal reception.
Load and Noise Problems
Addresses buzzing loads, electrical noise, and overheating.
Technical Specifications
Electrical and Load Ratings
Details on load types, maximum load, input power, and connections.
Operating Parameters
Information on addresses, on-level, fade-on rate, and operational limits.
Physical Dimensions and Mounting
Specifies physical size, mounting requirements, and LED indicators.
Product Certification and Warranty
ETL Certification Details
Information on independent third-party testing and safety standards met.
Limited Warranty Information
Outlines the two-year warranty, limitations, and claim procedures.
Need help?
Do you have a question about the SwitchLinc 2-Way 2380I and is the answer not in the manual?
Questions and answers