Table of Contents
Related Manuals for Smarthome SwitchLinc 2-Way 2381W
Summarization of Contents
Key Features and Product Overview
Core Functionality
Highlights 2-way communication, scene-readiness, and non-volatile memory.
User Interface and Installation
Describes rocker action, LED indicators, and ease of installation.
Compatible SwitchLinc Models
Lists other SwitchLinc variants like relays and timers.
Compatible Smarthome Products
Mentions ToggleLinc, ApplianceLinc, and LampLinc modules.
Safety Precautions and Quick Start
Important Installation Cautions
Warnings about dimming inductive loads and proper wiring.
Quick Start: Primary Address Setup
Steps to set the device's unique address.
Quick Start: Preset On-Level
How to set a default brightness level.
Quick Start: Fade-On Rate
How to adjust dimming speed.
Quick Start: Factory Reset
Procedure to restore default settings.
Quick Start: Programming Scenes
Steps to program scene commands.
Installation Preparation and Usage
Pre-Installation Checks and Precautions
Ensuring power is off, wiring, neutral requirements, and heat.
Basic SwitchLinc Operations
Explains manual control via rocker taps (on/off, dimming).
Advanced SwitchLinc Operations
Details double/triple taps for fast dimming.
Installation Guide
Step-by-Step Installation Procedure
Detailed instructions for physical installation of the switch.
Wiring Diagrams
Visual guides for single and multi-way wiring configurations.
Advanced Configuration
Primary Address Configuration
Steps to assign a unique PLC/X10 address.
Preset On-Level Settings
How to set a default brightness level upon activation.
Fade-On Rate Adjustment
How to customize the dimming speed.
Remote Configuration and Scenes
Remote On-Level and Fade-On Rate Setup
Using transmitters to set dimming parameters.
Scene Address Programming Basics
How scenes work and how to program them.
Scene Programming Details
Scene Programming Compatibility
Lists compatible Smarthome products for scene setup.
Scene Membership and On-Levels
How to assign modules to scenes and set their levels.
Scene Fade-on Rate Programming
How to set custom fade rates for scenes.
Scene Management and Advanced Options
Removing from Scenes
Procedure to unassign a device from a scene.
PLC Transmission Control
Options to disable or enable PLC transmissions.
Factory Reset Procedure
Steps to reset the device to default factory settings.
Programming Lockout and Powerline Reliability
Programming Lockout
How to prevent unintended changes to settings.
Power Restore Feature
Device behavior after power interruptions.
Querying Device Status
How to check the SwitchLinc's current state.
Powerline Signal Travel and Reliability
Explanation of PLC signal behavior and issues.
Improving PLC Signal Reliability
Sources of Signal Loss
Common devices that interfere with PLC signals.
Signal Amplification and Filtering
Solutions like BoosterLinc and FilterLinc.
Tools and New Construction Tips
Recommended Tools for Automation
Maxi-Controller, Signal Meter, Voltage Tester.
New Construction Installation Advice
Tips on wiring, box depth, and heat dissipation.
Advanced Installation and Glossary
Advanced New Construction Tips
Surge protection, phase couplers, load isolation.
Glossary of Terms
Definitions for PLC, X10, commands, and modules.
Troubleshooting Guide
Common SwitchLinc Issues and Solutions
Covers problems like self-triggering, unresponsive controls, and programming failures.
Signal and Noise Troubleshooting
Addresses issues with transmission, reception, and load noise.
Product Specifications
Electrical and Operational Specs
Load types, power, addresses, on-level, fade-on rate.
Physical and Mounting Specifications
Dimensions, gang box limits, mounting details.
Certification and Warranty
ETL Certification Details
Information on product testing and safety standards.
Limited Warranty Information
Terms and conditions of the product warranty.
Need help?
Do you have a question about the SwitchLinc 2-Way 2381W and is the answer not in the manual?
Questions and answers