Introduction
HP J4148A
SureStore CD
Expansion Tower
This user's guide contains information about installing and
maintaining HP J4148A SureStore CD Expansion Tower.
The HP J4148A SureStore CD Expansion Tower works with the
following products:
•
HP J3278A SureStore CD-ROM Server/Tower 7Plus
•
HP J3168A SureStore CD-ROM Server (standalone module)
When used with the Server/Tower 7Plus, the expansion tower
extends the capacity of the storage system to 14 CD-ROM drives.
When used with the standalone server, the expansion tower pro-
vides access to seven CD-ROM drives.
The expansion tower can be floor-mounted or rack-mounted.
Product Description
The HP J4148A SureStore CD Expansion Tower connects to an
HP server or server/tower, using the supplied SCSI cable.
The expansion tower contains seven HP CD-ROM drives in a
single subsystem. The HP CD-ROM drives are daisy-chained
together using an internal SCSI bus interface. The power
required to operate the CD-ROM drives is supplied internally by
the expansion tower.
All components of the tower are completely modular—the drives
are self-configuring modules. In the unlikely event a drive
should fail, replacement is a simple and straightforward proce-
dure.
A drive's SCSI ID is set automatically, based on its position in
the tower. An active terminator, provided with the expansion
tower, must be installed on the back of the tower.
1
Introduction 1