Tray Loading and
Operation
Note
Care of CD-ROMs
Note
6 Operation and Troubleshooting
1. While the drive is powered up, push the Stop/Eject button.
The tray drawer will slide out in 2–3 seconds.
2. Place the CD into the depression in the tray, label side up. For
a rack-mounted expansion tower, the label should face away
from the CD-ROM drive's lights and buttons.
3. Press the Stop/Eject button again, and the tray will slide shut
within 2–3 seconds.
We recommend you use the Stop/Eject button to close the
tray in a smooth and secure manner. Closing the tray by
pressing the front of the drawer by hand is not recom-
mended.
Check your CDs periodically to determine if they need cleaning.
If the CD is dusty, you can use a commercially available dust
removal spray to blow off dust particles. After removing the dust
particles, you can wipe the CD using a clean, soft cotton cloth.
Use a straight-line motion, wiping from the center out. Do not
wipe the CD in a circular motion.
Correct Procedure for Cleaning a Disc
If a CD becomes dirty or soiled with grease or other contami-
nants not removable by wiping, you can clean it with a CD-ROM
disc cleaner available at most computer dealers. Follow the
directions packaged with the cleaner.
Keeping your CD in its original case or in the CD-ROM drive
at all times will prevent it from becoming dirty or damaged.
Need help?
Do you have a question about the J3278B - SureStore CD-ROM Server/Tower 7 NAS Server and is the answer not in the manual?
Questions and answers