Table of Contents
Advertisement
DNS-120 User's Manual
Troubleshooting
1. Why is the USB LED orange when I connect my USB drive?
If the USB LED is solid orange after plugging in your USB hard drive, most likely the
USB drive is formatted with an incompatible file system.The drive must be formatted
with FAT, FAT32, or NTFS*.
* A NTFS formatted drive will be readable but cannot be written to by the DNS-120.
How do I reset my DNS-120 to factory defaults?
2. How do I reset the DNS-120 back to the factory default settings?
Locate the reset hole on the back on the unit. Using a paper clip, press and hold
the reset button for about 5 seconds and then release. After the DNS-120 reboots
it will be back to the factory default settings.
3. What is the default IP address of the DNS-120?
The DNS-120 does not have a default IP address. You will need to use the Easy
Search utility to assign an IP address to the DNS-120 (refer to page 10).
D-Link Systems, Inc.
Troubleshooting
43
Advertisement
Table of Contents
