Connection Configurations; N900 (Non Clustered) - Compaq StorageWorks NAS B3000 Connection Manual
Compaq storageworks nas b3000 connection
Hide thumbs
Also See for StorageWorks NAS B3000:
- Specification (21 pages) ,
- Quick start manual (70 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
Connection Configurations
The following configurations are available to you with your
NAS B3000:
IMPORTANT Do not connect the storage enclosure until the SAN connection
wizard has completed.
N900 (non clustered)
1. Connect the device to the external switches by attaching the
host bus adapter (HBA) to the designated switch port using a
fiber cable.
2. Connect the external switch to the storage enclosure using a
fiber cable.
N900 (non clustered)
Connect the device to the I/O module on the storage enclosure
by attaching the HBA to the 2-GB Small Form Factor Pluggable
(SFP) Transceiver using a fiber cable.
6 5 4
3 2 1
6 5 4
3 2 1
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks NAS B3000 and is the answer not in the manual?