Wlan Internet Access Points - Nokia IP130 - Security Appliance User Manual

other settings depend on the selected network
type.
Phone IP address
●
address of your device.
DNS address — Enter the IP addresses of the
●
primary and secondary DNS servers, if required
by your service provider. Contact your internet
service provider to obtain these addresses.
Proxy server address
●
the proxy server.
Proxy port number
●
of the proxy server.

WLAN internet access points

Press , and select
Connection Access points
>
or New access point.
Follow the instructions from the WLAN service
provider.
WLAN network name
●
manually or Search for
an existing network,
WLAN security mode
settings of its access point device.
Network status
●
name is displayed.
WLAN network mode
●
create an ad hoc network and to allow devices to
158
(for IPV4 only) — Enter the IP
— Enter the address of
— Enter the port number
Tools Settings
> >
Options
> >
— Select Enter
networks. If you select
WLAN network mode
are determined by the
— Define whether the network
— Select Ad-hoc to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same
name.
WLAN security mode
●
used: WEP, 802.1x
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select WLAN security
Security settings for WEP
WEP key in use
●
Edit
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
Authentication type
●
Shared for the authentication type between
your device and the WLAN access point device.
WEP key settings
●
and
(length of the key),
Hexadecimal), and
in the selected format).
Security settings for 802.1x and WPA/WPA2
WPA/WPA2
●
authentication:
WLAN network
— Select the encryption
(not for ad hoc networks), or
Open network, no
settings.
— Select the wired equivalent
— Select Open
— Enter WEP encryption
WEP key format (ASCII
WEP key (the WEP key data
— Select the means of
EAP to use an extensible
or
or