Guides; Landmarks - Nokia IP130 - Security Appliance User Manual

To update the traffic information, select
traffic info. To define how often the traffic
information is updated automatically, select
Options Tools
>
Traffic info update.
To automatically create an alternative route in case
of a traffic event that would cause delays or prevent
you from reaching the destination, select
Options Tools
>
Reroute due to traffic

Guides

To purchase and download different kinds of
guides, such as city and travel guides, for different
cities to your device, select
Guides.
The guides provide information about attractions,
restaurants, hotels, and other points of interest. The
guides must be downloaded and purchased before
use.
To browse a downloaded guide, on the
tab in Guides, select a guide and a subcategory (if
available).
To download a new guide to your device, in Guides,
select the desired guide and
purchase process starts automatically. You can pay
for the guides using a credit card or have the
98
Update
Settings Navigation
> >
Settings Navigation
> >
> Automatic.
Options Extras
>
My guides
Download > Yes. The
amount charged to your phone bill (if supported by
your cellular network service provider).
To confirm the purchase, select
>
a confirmation of the purchase through e-mail,
enter your name and e-mail address, and select
OK.

Landmarks

>
Press , and select
Landmarks.
With Landmarks, you can save the position
information of specific locations in your device. You
can sort the saved locations into different
0
>
categories, such as business, and add other
information to them, such as addresses. You can use
your saved landmarks in compatible applications,
such as GPS data
GPS coordinates are expressed in degrees and
decimal degrees format using the international
WGS-84 coordinate system.
To create a new landmark, select
landmark. To make a positioning request for your
current location, select
the position information manually, select
manually.
OK twice. To receive
Tools Connectivity
>
and Maps.
Options
Current position. To enter
>
New
>
Enter