Gps Receiver; Tips On Creating A Gps Connection - Nokia IP130 - Security Appliance User Manual

from the Nokia A-GPS service. To define an access
point for A-GPS, press
Settings General
>
Positioning server
access point cannot be used for this service. The
packet data internet access point is asked when GPS
is used for the first time in your device.
To enable or disable different positioning methods,
such as Bluetooth GPS, press
Settings General
>
Positioning methods.

GPS receiver

The GPS receiver is located in the bottom of the
device. When using the receiver, slide the numeric
keypad open, and from an upright position, move
the device to an angle of about 45 degrees, with an
unobstructed view of the sky. Do not cover the
numeric keypad with your hand.
90
, and select Tools
>
Positioning
> >
Access point. A wireless LAN
>
, and select Tools
Positioning
> >
Establishing a GPS
connection may take
from a couple of
seconds to several
minutes. Establishing
a GPS connection in
the car may take
longer.
The GPS receiver
>
draws its power from the device battery. Using the
GPS receiver may drain the battery faster.
Tips on creating a GPS
connection
If your device cannot find the satellite signal,
consider the following:
If you are indoors, go outdoors to receive a better
●
signal.
If you are outdoors, move to a more open space.
●
Ensure that your hand does not cover the GPS
●
antenna of your device.
receiver", p. 90.
If the weather conditions are bad, the signal
●
strength may be affected.
See "GPS