Download Maps - Nokia IP130 - Security Appliance User Manual

Settings Map
> >
mode.
To adjust other internet, navigation, routing, and
general map settings, select
Settings.

Download maps

When you browse a map on the display in Maps, a
new map is automatically downloaded if you scroll
to an area which is not covered by maps already
downloaded. You can view the amount of
transferred data from the data counter (kB) shown
on the display. The counter shows the amount of
network traffic when you browse maps, create
routes, or search for locations online. Downloading
maps data may involve the transmission of large
amounts of data through your service provider's
network. Contact your service provider for
information about data transmission charges.
To prevent the device from automatically
downloading maps through the internet, for
example, when you are outside your home cellular
network, or other map related data required by the
extra services, select
Settings Internet
>
No.
94
Colours Day mode or
>
Options Tools
>
Options Tools
> >
Go online at start-up
>
Night To define how much of the mass memory you want
to use for saving maps data or voice guidance files,
select Options
Maximum memory use
>
use. When the memory is full, the oldest map data
is deleted. The saved maps data can be deleted
using Nokia Map Loader PC software.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to
download and install maps to your device from the
internet. You can also use it to download voice files
for turn-by-turn navigation.
To use Nokia Map Loader, you must first install it to
a compatible PC. You can download the PC software
from the internet at www.nokia.com/maps. Follow
the instructions on the screen.
You must use the Maps application and browse
maps at least once before using Nokia Map Loader.
Nokia Map Loader uses the Maps history
information to check the version of map data to be
downloaded.
After you have installed the PC software to your PC,
to download maps, do the following:
1. Connect your device to the PC by using a
>
compatible USB data cable. Select
transfer as the USB connection mode.
Tools Settings
> > >
Max. mass memory
>
Data
Map
>