Kx-Td500 Pbx Programming For Inband Integration - Panasonic KX-TVA594 Installation Manual

5.6 KX-TD500 PBX Programming for Inband
Integration
DPT Integration is recommended when using the VPS with the KX-TD500, however, Inband
Integration is necessary when:
• the PBX has available SLT ports but no available DPT ports.
• the cards installed in the PBX or the software version of the PBX do not support DPT
Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer
to the documentation included with the PBX or consult your dealer for more information.
1.
Assignment of the extension card to be connected to the VPS
Note
• If the VPS card to which the VPS will be assigned is already installed in the KX-TD500, skip
the steps a through d. If a new VPS card is installed in the KX-TD500, follow the steps below.
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot card type to be installed to "DHLC", "HLC", "SLC", "ESLC", or "SLC-M"
SLT interface supports.
c)
Click "Apply" to save the slot card type assignment.
d)
Set "Card Status" to "INS".

5.6 KX-TD500 PBX Programming for Inband Integration

Installation Manual 153