Kx-Ta824 Pbx Programming For Inband Integration - Panasonic KX-TVA594 Installation Manual

5.4 KX-TA824 PBX Programming for Inband Integration

5.4 KX-TA824 PBX Programming for Inband
Integration
The instructions in this section are for programming a KX-TA824 via the Operating and Maintenance
Tool. To program a KX-TA824 using the Manager Extension, follow the instructions for KX-TA series
PBX programming by referring to 5.7 KX-TA Series PBX Programming for Inband Integration.
1.
Go to the "1.System-2.Main" screen.
2.
Under "Voice Mail", select "DTMF Integration", then select each extension jack that is connected
to the VPS. Click "Apply" to save the changed data.
3.
Go to the "2.Extension-6.Extension Group" screen.
4.
Put all extensions connected to the VPS into the same extension group.
Reserve this extension group for these extensions! Do not mix other extensions into this
group.
5.
Set the hunting type for the VPS extension groups to "Circular". Click "Apply" to save the changed
data.
146 Installation Manual