Repeat Track / Group / Disc; A-B Repeat; Program Playback - Denon DVM-2845CI Operating Instructions Manual

DISC PLAYBACK

REPEAT TRACK / GROUP / DISC

To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
OFF
(repeat off) (current track repeat)
5 Disc Repeat
NOTES:
• In the track repeat, the repeat setting will be cleared
when moving to other track.
• Repeat playback does not function during A-B repeat
playback.
• You cannot set up to the 5 Disc Repeat in Video CD.
DVD-A MP3
OFF TRACK
(repeat off) (current track
repeat)
5 Disc Repeat
NOTES:
• In the track or group repeat, the repeat setting will be
cleared when moving to other track or group.
• You cannot set up to the 5 Disc Repeat in DivX

A-B REPEAT

DVD-V DVD-A
1 Press the A-B REPEAT button
at your chosen starting point.
• A- appears briefly on the
TV screen.
2 Press the A-B REPEAT button
again at your chosen end point.
• A-B appears briefly on the
TV screen, and the repeat
sequence begins.
3 To exit the sequence, press
the A-B REPEAT button.
NOTES:
• The A-B Repeat section can only be set within the cur-
rent title (for DVD-Video), or current track (for DVD-Audio,
Audio CD, Super Audio CD, Video CD and with DivX
files).
• A-B Repeat is not available with some scenes on DVD.
• To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track, group, disc or 5 disc repeat playback.
• For some DivX ® files, A-B Repeat playback may not
function.
VCD CD
PBC OFF
TRACK DISC
(entire disc repeat)
JPEG WMA DivX
GROUP
(current folder (entire disc
repeat) repeat)
VCD CD
DivX
A -
A - B
OFF

Program Playback

This function allows you to program a playback order of
Super
Audio CD
DVD-Audio, Audio CD, Super Audio CD, MP3, JPEG, or
WMA in a desired sequence.
1 In stop mode, press the MODE
button repeatedly until the pro-
gram screen appears.
• The group selection screen will
appear.
2 Press the Cursor buttons
(▲ or ▼) to select a group, then press the ENTER
button.
• The track selection screen will be displayed.
• It takes approximately five seconds until the track
selection screen appears.
Press the Cursor buttons (▲ or ▼) to select a
3
track, then press the ENTER button.
• Press the Cursor button (s) to go back to the group
® selection screen from the track selection screen.
4 Press the PLAY button to play back the pro-
DISC
grammed tracks.
You may determine the order in which
tracks will play.
1 In stop mode press the MODE
button.
• The PROGRAM screen will
appear.
.
®
Press the Cursor buttons (▲ or ▼) to select a
2
disc, then press the ENTER button.
Super
• Press the CLEAR button to erase the most recently
Audio CD
entered program.
®
3 Press the Cursor buttons
(▲ or ▼) to select a track, then
press the ENTER button.
• Press the CLEAR button to erase
the most recently entered pro-
gram.
4
Press the PLAY button to start programmed play-
back.
NOTE:
• DVD-Audio, DVD-Video, MP3, JPEG and WMA discs will
display in gray when "PROGRAM [5DISC]" screen
appears.
®
– 22 –
DVD-A
PROGRAM
DVD-AUDIO TOTAL 0:00:00
1 1:02:25
G
G 2 1:03:30
ALL CLEAR
1/1
1/1
1 1:02:25
G
Super
CD
Audio CD
PROGRAM
DISC
CD-DA
CD-DA
CD-DA
DVD
ALL CLEAR
1/ 1
CD-DA
PROGRAM
CD-DA
1
1 T
T
T 2
T 3
T 4
5
T
T 6
7
T
1/1
1/2
T 1
EN