Camera Angle; Picture Control; Sound Mode; Stereo Sound Mode - Denon DVM-2845CI Operating Instructions Manual

DISC PLAYBACK

Camera Angle

Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8
NOTE:
• If the ANGLE ICON setting is OFF in the OTHERS
menu, the ( ) will not appear.

Picture Control

DVD-V
Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
1 During playback, press the
MODE button.
2 Press the Cursor buttons (K
or L) to switch among items.
3 Press the ENTER button or the Cursor buttons (s or
B) to adjust the selected item to a desired level.
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.
4
To return to normal playback, press the RETURN
button.
NOTES:
• The default settings for all items in Picture Control are "0".
• The setting display will disappear in 10 seconds of no use.
• This function cannot be used during Dialog Speed
(refer to page 28).
• If you return all items to the default settings, select
"INITIALIZE" at step 2.

Sound Mode

This function allows you to select a desired sound mode dur-
ing DVD-Audio playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
desired sound.
NOTE:
• When selecting a multi-
channel sound, it may
not mixed down in
some cases even
though the HDMI
AUDIO or ANALOG
AUDIO is 2 CHANNEL.
DVD-V
) mark appears on the screen.
Angle 1
Angle 2
Angle 8
DVD-A VCD DivX
BRIGHTNESS s +1B
DVD-A
1.LPCM 3/2.1ch 96k/2
2.PPCM 2/0ch 96k/2

Stereo Sound Mode

1 Press the AUDIO button repeatedly during play-
back to select your desired sound mode.
STEREO - both right and left channels are active (stereo)
L-ch - only left channel is active
R-ch - only right channel is active
STEREO
L-ch
R-ch
NOTE:
• The STEREO can only be output when playing back
DTS CD.

Super Audio CD Setup

1 Press the SUPER AUDIO CD SET UP button
repeatedly to select among MULTI-CH AREA, CD
AREA, or 2CH AREA.
MULTI-CH AREA - Playback in multi channel format.The
®
number of channels depends on the disc
being played.
CD AREA - Playback in the same quality with sound
as normal CDs.
2CH AREA - Playback in higher quality than that of
normal CD sound.
MULTI-CH AREA
CD AREA
2CH AREA
NOTES:
• The Virtual Surround setting is not available for Super
Audio CDs. (It may be possible to use the Virtual Surround
setting when playing back discs that include a CD area.)
• Some playback options may not be available.These will
be skipped.
• MULTI-CH AREA is selected as default.
– 29 –
VCD CD
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
Super
Audio CD
SACD
SACD
front panel display
EN