Advertisement
Advertisement
Table of Contents
Related Manuals for Maytag MDG4000AWW
Summarization of Contents
Installation Instructions: Automatic Dryer (Gas)
Safety Warnings
General safety precautions and warnings for fire and explosion risks.
What to do if you smell gas
Emergency procedures to follow if a gas leak is detected.
Tools Required
Lists the necessary tools for installation.
Installing Your New Dryer
Step-by-step instructions for physically installing the dryer.
Gas Connections
Requirements and procedures for connecting the gas supply.
Pre-Installation Checklist
Owner's Responsibility
Outlines the owner's role in proper installation and setup.
Installation Requirements
Key requirements for electrical outlet, power cord, gas lines, and exhaust.
Important Installer Information
Location Considerations
Guidelines for choosing a suitable installation location.
Dryer Area Requirements
Specifies conditions for the dryer's operating environment.
Alcove or Closet Installation
Closet Installation Requirements
Rules for installing appliances in closets, including ventilation.
Door Opening Requirements
Specifies minimum opening area in doors for ventilation.
Minimum Installation Clearances
Recommended clearances for alcove and closet installations.
Mobile Home Installation
Mobile Home Standards
Conformance requirements for mobile home installations.
Anchoring Requirements
Need for anchoring the dryer in mobile homes.
Makeup Air for Mobile Homes
Requirement for adequate makeup air in mobile home locations.
Exhausting for Mobile Homes
Rules for exhausting mobile home dryer installations to the outside.
Exhaust Ducting Guidelines
Duct Material and Size
Specifies recommended duct material and diameter.
Exhaust System Lengths
Tables showing maximum lengths for rigid and flexible metal ducts.
Duct Installation Best Practices
Tips for keeping ducts straight, short, and securely joined.
Exhaust Venting Restrictions
Prohibits venting into walls, ceilings, or concealed spaces due to fire hazard.
Exhaust Hood Requirements
Guidelines for exhaust hood type, clearance, and placement.
Gas Requirements and Connections
Gas Type and Conversion
Information on using Natural or LP gas and conversion procedures.
Gas Shut-off Valve
Requirement for an approved manual gas shut-off valve.
Gas Line Re-use Warning
Prohibition against reusing old flexible metal gas lines.
Electrical Requirements and Grounding
Wiring and Grounding Standards
Adherence to national and local electrical codes for wiring and grounding.
Grounding Purpose
Explanation of why grounding is essential for electrical safety.
Gas Model Electrical Connection
Specifics for connecting gas models to a grounded outlet.
Electrical Connections and Grounding Details
Ground Wire Connection
Instructions for connecting the ground wire using an accessory kit.
Ground Wire Connection Restrictions
Prohibits connecting ground wires to plastic plumbing or gas lines.
Circuit Requirements
Recommendation for a dedicated circuit and prohibition of extension cords.
Initial Dryer Placement
Remove crate wires
Step for removing the crate base wires.
Gas Dryer Connection
Prepare Gas Connection
Remove protective cap from the gas pipe thread.
Apply Pipe Sealant
Apply pipe joint compound or Teflon tape to threaded connections.
Connect Gas Supply
Connect the gas supply line to the dryer using appropriate fittings.
Check for Gas Leaks
How to check gas connections for leaks using a soap solution.
Electric Dryer Connection
Terminal Block Grounding
Dryer frame is grounded to the neutral conductor at the terminal block.
Power Cord Strain Relief
Requirement to use a UL listed strain relief for the power cord.
3-Wire System Connections
Instructions for connecting a 3-wire power cord to the terminal block.
4-Wire System Connection
Instructions for connecting a 4-wire power cord, especially for mobile homes.
Need help?
Do you have a question about the MDG4000AWW and is the answer not in the manual?
Questions and answers