CONNECTIONS
Connection to 5.1-channel Surround Sound System
Analog 5.1-channel audio signals can be output from the DVD player.
The multi-channel audio signals recorded in packed PCM and the multi-channel Super Audio CDs can be
played back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.
Center speaker
Front speaker
(left)
AV amplifier
Surround
with
speaker
5.1-channel
(left)
audio input jacks
NOTES:
• For 5.1-channel connections, set ANALOG AUDIO to MULTI CHANNEL in the setup mode and adjust Speaker
Configuration, DELAY TIME and CHANNEL LEVEL settings (refer to page 30).
• You can enjoy high-quality analog sound by cutting off the video signal. Press the PURE DIRECT button on the front panel.
Front speaker
(right)
Subwoofer
Surround
speaker
(right)
– 14 –
– 14 –
AUDIO
DVD
To 5.1-channel
Audio Input
Jacks
Speaker
Cable
(commercially
available)
5.1ch
AUDIO OUT
EN
EN