Heat & Glo SL-550TR-D Owner's Manual

Heat & Glo SL-550TR-D Owner's Manual

Narural/liquefied petroleum gas

Advertisement

Models:
SL-950TR-D
SL-750TR-D
SL-550TR-D
Important operating and
maintenance instruc-
tions included.
WARNING: If the information in these
instructions is not followed exactly, a fire
or explosion may result causing proper-
ty damage, personal injury, or death.
• Do not store or use gasoline or other flamma-
ble vapors and liquids in the vicinity of this or
any other appliance.
• What to do if you smell gas
- Do not try to light any appliance
- Do not touch any electrical switch. Do not
use any phone in your building.
- Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
- If you cannot reach your gas supplier, call
the fire department.
• Installation and service must be performed by
a qualified installer, service agency, or the gas
supplier.
This appliance may be installed as an OEM installation in
manufactured home (USA only) or mobile home and must
be installed in accordance with the manufacturer's instruc-
tions and the manufactured home construction and safety
standard, Title 24 CFR, Part 3280 or Standard for Installa-
tion in Mobile Homes, CAN/CSA Z240MH.
This appliance is only for use with the type(s) of gas indi-
cated on the rating plate.
CAUTION
DO NOT DISCARD THIS MANUAL
Read, understand and follow
these instructions for safe
installation and operation.
Heat & Glo • SL-550 / 750 / 950TR-D • 2044-985 Rev. J • 6/06
Owner's Manual
Installation and Operation
Leave this manual with
party responsible for
use and operation.
WARNING
HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.
Glass and other surfaces are hot during
operation and cool down.
• Keep children away.
• CAREFULLY SUPERVISE children in same room as
appliance.
• Alert children and adults to hazards of high
temperatures.
• Do NOT operate with protective barriers open or
removed.
• Keep clothing, furniture, draperies and other
combustibles away.
This appliance has been supplied with an integral barrier
to prevent direct contact with the fixed glass panel. Do
NOT operate the appliance with the barrier removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.
In the Commonwealth of Massachusetts:
• installation must be performed by a licensed plumber or
gas fitter;
See Table of Contents for location of additional
Commonwealth of Massachusetts requirements.
Installation and service of this appliance should be
performed by qualified personnel. Hearth & Home
Technologies suggests NFI certified or factory-trained
professionals, or technicians supervised
by an NFI certified professional.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL-550TR-D and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety and Warning Information
General Safety Precautions
Essential safety rules and warnings for appliance installation and operation, covering hazards and precautions.
Approvals and Codes
Appliance Certification
Details on the appliance's tested certification standards and listing laboratories.
Installation Codes
Requirements for local building codes and national installation standards.
High Altitude Installations
Guidelines for installing the appliance at higher elevations and required adjustments.
Massachusetts Installation Requirements
Specific installation requirements for the Commonwealth of Massachusetts.
Getting Started
Introducing Heat & Glo Appliances
Overview of direct vent gas appliances and their operational principles.
Pre-installation Preparation
Steps and considerations before beginning the appliance installation process.
Installing the Appliance
Constructing the Appliance Chase
Instructions for building the enclosure for the gas appliance and vent system.
Locating the Appliance
Space and clearance requirements for siting the appliance within a room.
Framing the Appliance
Methods and dimensions for framing the appliance based on its specifications.
Installing the Vent System
Detailed instructions for connecting and securing the vent system components.
Positioning and Securing the Appliance
Proper methods for placing, leveling, and securing the appliance in its final location.
Gas Control Systems
Explanation of the standing pilot and intermittent pilot ignition systems.
Gas Supply Line Installation
Guidelines for installing the gas supply line, including safety and code compliance.
Gas Pressure Requirements
Specifications for natural gas and propane pressure for appliance operation.
Wiring the Appliance
Electrical wiring instructions for standing pilot and intermittent pilot systems.
Finishing the Appliance
Guidelines for combustible clearances, trim, and sealant around the appliance.
Installing Trim, Logs, and Ember Material
Procedures for installing decorative trim, logs, and ember material.
Before Lighting the Appliance
Final checks and preparations before the initial appliance lighting.
Lighting the Appliance
Instructions and warnings for safely lighting the gas appliance.
After the Installation
Instruction to leave the manual with the appliance for future reference.
Maintaining and Servicing Your Appliance
Appliance Maintenance Overview
General guidelines and frequency for servicing specific appliance components.
Replacing Ember Material
Procedure and frequency for replacing old ember material.
Cleaning Burner and Controls
Annual cleaning of the burner, controls, and surrounding areas.
Flame Sensor Rod Cleaning (IPI)
Procedure for cleaning the flame sensor rod on IPI systems.
Flame Pattern and Height Checks
Visual checks for proper flame patterns and steady flame height.
Vent System Checks
Inspection of the vent cap and entire vent system for function and debris.
Glass Door Cleaning
Instructions for cleaning the glass door after initial use and as needed.

Table of Contents

Save PDF