Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Jura IMPRESSA E10
Summarization of Contents
Safety and Initial Setup
1.1 Safety Warnings
Key safety warnings regarding children, operation, and defective parts.
1.2 Safety Precautions
Precautions for placement, handling, and usage environment.
2.1 Voltage and Fuse Checks
Verifying voltage and checking the electrical fuse capacity.
2.3 Water Tank Filling
Instructions for filling the water tank with fresh, cold water.
Machine Preparation and First Use
2.4 Coffee Bean Filling
Instructions for filling the bean tank, noting unsuitable bean types.
2.5 Grinding Gear Adjustment
How to adjust the grind setting for different roasts.
2.6 Power Switch Operation
Instructions on using the power switch for first use and longer periods.
3.0 First Use Procedure
Steps for the initial system filling and rinsing operation.
Water Hardness and Filter Installation
4.0 Water Hardness Setting
How to set the machine to the correct water hardness level.
5.0 Claris Filter Cartridge
Introduction to installing the Claris plus filter for descaling prevention.
Filter Management
5.1 Install Claris Filter
Step-by-step guide for installing the Claris plus filter cartridge.
5.2 Replace Filter (Prompt)
Instructions for replacing the filter when the machine prompts.
5.3 Replace Filter (No Prompt)
Procedure for replacing the filter when no prompt is shown.
Core Coffee Brewing Operations
6.0 Rinsing Operations
How the machine performs rinsing when switched on or off.
7.0 Adjust Coffee Water Quantity
How to set the amount of water for coffee preparation.
8.0 Brew 1 Cup Coffee
Step-by-step guide for brewing a single cup of coffee.
9.0 Brew 2 Cups Coffee
Instructions for brewing two cups of coffee simultaneously.
Advanced Brewing and Hot Water
10.0 Use Pre-ground Coffee
Using pre-ground coffee, including warnings about types and quantity.
11.0 Dispense Hot Water
Procedure for dispensing hot water.
Steam and Frothing Attachments
12.0 Drawing Off Steam
Instructions for drawing off steam for heating or frothing.
13.1 Attach Frother
Guide on connecting the optional frothing attachments.
13.2 Cappuccino w/ Pro Frother
Steps for making cappuccino and hot milk using the professional frother.
Frother Use, Cleaning, and Programming
13.3 Cappuccino w/ Easy Frother
Steps for making cappuccino using the Easy Cappuccino Frother.
13.4 Clean Frothers
Instructions for cleaning the frothing attachments.
15.0 Programming Options
Overview of programmable settings like filter, hardness, and auto-off.
Maintenance and Auto-Off Programming
16.0 General Maintenance
General maintenance overview.
16.1 Refill Water Tank
Daily rinsing and refilling of the water tank.
16.2 Empty Grounds Container
Instructions for emptying the coffee grounds container.
15.3 Program Auto Switch-Off
Setting the automatic switch-off duration.
Cleaning Procedures
16.5 Replace Filter
Referencing the filter replacement chapter upon prompt.
16.6 General Cleaning
Guidelines for cleaning the machine and its parts.
17.0 Cleaning Upon Display Request
Instructions for running the cleaning program when prompted.
Manual Cleaning and De-scaling
17.1 Manual Cleaning Program
Manual procedure to start the cleaning program.
18.0 De-scale Upon Display Request
Procedure for de-scaling when the machine prompts.
Manual De-scaling and Disposal
18.1 Manual De-scaling
Manual procedure to start the de-scaling program.
19.0 Product Disposal
Recommendation to return the machine to a dealer or service shop.
Coffee Optimization Tips
20.0 Perfect Coffee Tips
Tips on spout height, grinding degree, and preheating cups.
Messages and Troubleshooting
21.0 Display Messages
Explains displayed messages, their causes, and remedies.
Problem Solving Guide
22.0 Common Problems
Lists common problems, their causes, and solutions.
Legal and Technical Information
23.0 Legal Information
Legal disclaimers, warranty, and copyright information.
24.0 Technical Data
Specifications like voltage, power, dimensions, and compliance.
Need help?
Do you have a question about the IMPRESSA E10 and is the answer not in the manual?
Questions and answers