Advertisement
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty
O
'
M
peratOr
s
anual
Three Stage Snow Thrower — 3X 26, 3X 26 HD, 3X 28,
& 3X 30 HD
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Form No. 769-08980A
(July 2, 2013)
Advertisement
Table of Contents
Related Manuals for Cub Cadet 3X 30HD
Summarization of Contents
To The Owner
Product Information and Support
Instructions for recording product details and accessing customer support.
Important Safe Operation Practices
Safety Warnings, Training, and Preparation
Covers general warnings, California Proposition 65, danger alerts, user training, and area preparation for operation.
Maintenance and Storage Procedures
Clearing Clogged Chute and Storage
Steps for clearing a clogged chute and general maintenance/storage advice.
Engine and Emissions Compliance
Discusses engine modifications, emissions, and spark arrestor requirements.
Assembly and Set-Up
Package Contents and Chute Styles
Lists items in the carton and identifies chute control styles for assembly.
4-Way Chute Assembly
Handle and Chute Assembly Steps
Detailed instructions for assembling the handle and chute components.
4-Way Chute Assembly
Chute Control Rod Installation Details
Specific steps for connecting the chute control rod to the joystick assembly.
4-Way Chute Assembly
Overhead Chute Control Handle Assembly
Instructions for assembling the handle and connecting chute control cables for overhead systems.
4-Way Chute Assembly
Chute Assembly and Securing Procedures
Steps to place and secure the chute assembly and control head.
4-Way Chute Assembly
Flex Shaft and Shear Pin Storage
Instructions for installing the flex shaft and storing shear pins.
Adjustments Overview
Skid Shoes Adjustment
Guidelines for adjusting skid shoes based on surface conditions.
Adjustments Overview
Skid Shoes Adjustment Details
Detailed steps for adjusting and securing skid shoes.
Controls and Features
Shift Lever and Speed Selection
Explains the function and positions of the shift lever for forward and reverse speeds.
Augers, Chute Assembly, and Headlight
Describes the function of augers, chute assembly, and headlight operation.
Skid Shoes and Other Controls
Information on skid shoes adjustment and other control features.
Operation Controls
Auger, Drive, Heated Grips Controls
Details on operating auger, drive, and heated grips controls.
Steering Trigger Controls
Instructions for using the left and right wheel steering trigger controls.
Chute and Clean-Out Controls
Chute Directional, Pitch, and Clean-Out Tool
Instructions for operating chute controls and using the clean-out tool.
Starting and Engaging Operation
Engine Start, Drive, Augers, and Steering
Steps for starting the engine and engaging drive, augers, and steering.
Heated Grips and Shear Pin Replacement
Instructions for using heated grips and replacing shear pins.
Maintenance and Adjustments
Engine, Tire Pressure, and Shave Plate
Maintenance for engine, tire pressure, and adjusting shave plates.
Skid Shoes Maintenance and Adjustment
Instructions for maintaining and adjusting skid shoes.
Lubrication Points
Wheels, Auger Shaft, and Gear Shaft Lubrication
Details on lubricating key components for maintenance.
Shift Rod Adjustment
Shift Rod Adjustment Details
Further steps for adjusting the shift rod and its ferrule.
Auger, Drive, and Shift Cable Adjustments
Chute Control and Overhead Chute Adjustments
Steps for adjusting chute control rod and overhead chute pre-load.
Need help?
Do you have a question about the 3X 30HD and is the answer not in the manual?
Questions and answers