Related Manuals for Beta EVO 2T 125
Summarization of Contents
General Information
Main Parts
Identifies key components of the motorcycle with numbered labels.
Vehicle Identification Data
Details how to find frame and motor identification numbers.
Instrument Panel and Controls
Lists and identifies the main controls on the handlebar.
Technical Data
Provides detailed specifications for different motorcycle models and components.
Electrical Diagram
Illustrates the motorcycle's electrical system wiring and components.
Operation and Use
Checks and Maintenance Before and After Off-Road Use
Outlines essential checks for tyres, spokes, nuts, bolts, chain, and air filter.
Fueling
Instructions on how to refuel, including fuel type, tank capacity, and reserve.
Recommended Lubricants and Liquids
Lists specific types and technical specifications for oils, greases, and coolants.
Breaking In
Guidance on the initial running-in period for new motorcycles to ensure proper engine seating.
Startup
Steps for starting the engine, including fuel valve operation and kick-starter use.
Map Switch
Explains how to select different engine performance maps for various riding conditions.
Maintenance and Checks
Gearbox Oil
Instructions for checking and changing the gearbox oil level and quantity.
Brake Pump Oil
Details on checking and topping up front and rear brake fluid levels.
Bleeding of Brakes
Procedure to remove air from the front and rear brake hydraulic circuits.
Clutch Pump Oil
Guidance on checking and maintaining the clutch fluid level and ensuring proper play.
Bleeding of Clutch
Steps to remove air from the clutch hydraulic system for proper engagement.
Fork Oil
Instructions for replacing the oil in the front fork's right and left shafts.
Air Filter
Procedure for cleaning and maintaining the air filter for optimal engine breathing.
Spark Plug
Guidance on checking and replacing the spark plug for efficient combustion.
Generator Check
Instructions for testing the motorcycle's generator using a multimeter.
Front Brake Check and Replacement
Procedures for inspecting wear and replacing front brake pads.
Rear Brake Check and Replacement
Procedures for inspecting wear and replacing rear brake pads.
Liquid Coolant
How to check and maintain the engine's liquid coolant level to prevent overheating.
Silencer
Instructions for checking and repacking the motorcycle's silencer for noise and performance.
Carburettor
Guidance on cleaning and adjusting the carburettor for optimal fuel mixture.
Valve Petals
Procedure for checking the condition and seating of valve petals after use.
Rear Shock Absorber Leverage
Steps to check and maintain the rear suspension linkage for optimal performance and durability.
Checks After Cleaning
Post-cleaning checks for air filter, flywheel cover, carburettor, and chain integrity.
Maintenance Schedule
A comprehensive schedule of maintenance tasks based on operating hours or kilometers.
Adjustements
Adjustment of Brakes
How to adjust the front and rear brake levers and pedals for optimal response.
Adjustment of Clutch
Guidance on adjusting the clutch lever position and ensuring correct play.
Adjustment of Idling Speed
Procedure to set the engine's minimum stable running speed (idle) at 1000 rpm.
Adjustment of Gas Clearance
How to adjust the accelerator cable for correct throttle response and free play.
Adjustment of Air
Instructions for adjusting the air screw on the carburettor, typically 1.5 turns from closed.
Check and Adjustment of Steering Gear
How to check for play in the steering and adjust it for safe handling.
Tightening the Chain
Procedure for checking and adjusting the drive chain tension and alignment.
Adjustment of Front Suspension
How to adjust front fork suspension settings based on rider weight and preference.
Adjustment of Rear Shock Absorber
How to adjust the rear shock absorber's spring preload for different riding conditions.
What to Do in an Emergency
Troubleshooting
Provides common problems, their causes, and recommended remedies for the motorcycle.
Need help?
Do you have a question about the EVO 2T 125 and is the answer not in the manual?
Questions and answers