Troubleshooting - Denon CHR-F103 Operating Instructions Manual

ENGLISH

Troubleshooting

If a problem should arise, first check the following.
1. Are all connections proper ?
2. Have you operated the player according to the Operating Instructions ?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
¢ System
Symptom Cause
Display does not light and • Power supply cord is not plugged into
no sound is produced power outlet.
when power is turned on.
No sound is produced or • Incomplete connections with the
sound is distorted. various devices.
• The receiver's function setting or
adjustments are not right.
Display is dim. • Dimmer function is on.
¢ CD
Symptom Cause
"No Disc" is shown on • The disc is not properly loaded.
the display even though
a CD is loaded.
Disc is not played when • The disc is dirty or scratched.
button is pressed.
1/3
A specific part of a disc • The disc is dirty or scratched.
is not played.
A CD-R or CD-RW disc • The disc has not been finalized.
cannot be played. • The recording conditions are bad or
the quality of the disc itself it poor.
MP3 and WMA files • The file formats, extensions or settings
cannot be played. made when disc was created are not
compatible with the CHR-F103.
CD disc information is • You are not connected to the network.
not displayed. • The CD information is not included in
the Gracenote database on the HDD.
Measures Page
• Plug the power supply cord into the 11
power outlet.
• Check the connections. 11
• Check the receiver's function and —
controls and adjust as necessary.
• Turn the dimmer function off by 15
pressing the DIMMER button on the
remote control unit.
Measures Page
• Reload the disc. 4
• Wipe the dirt off the disc or replace 4
the disc.
• Wipe the dirt off the disc or replace 4
the disc.
• Finalize the disc then play it. 4
• Use a properly recorded disc. —
• Create discs with file formats, 24
extensions or settings compatible
with the CHR-F103.
• Connect to the network. 12
12
36
ENGLISH
¢ HDD
Symptom Cause
Selected tracks are not • Copyright protected tracks cannot be
recorded. recorded.
• MP3 and WMA files cannot be
recorded.
Recorded tracks are not • Track registration information may
displayed. not be displayed properly if recording
was not completely normally, if the
AC power cord was unplugged during
recording, etc.
CD recording takes a lot • Recording can take a long time if the
of time. CD is scratched or dirty.
¢ NET
Symptom Cause
You are not connected to • The LAN cable is disconnected.
the network. • (Server and CHR-F103) connected by
cross cable.
• Router's or hub's power is off.
• Network settings are wrong.
Sound is broken. • The sound may be broken depending
on the network environment.
No sound is produced. • Playback data is in a format with which
the CHR-F103 is not compatible.
Measures Page
19
• Copy from the computer onto the 19
internal HDD using Denon Music
Manager.
• If the track registration information is —
not normal, press the ON/STANDBY
button while pressing the button
2
and the CD/HDD/USB/NET button
simultaneously with the CHR-F103 in
the standby mode. "Rebuild Index
Mode" is displayed.
Select "Yes" then press the ENTER
button to rebuild the information
registered on the HDD.
• Wipe the dirt off the disc or replace 4
the disc.
Measures Page
• Connect properly with a LAN cable. 12
• Connect properly with a LAN cable. 13
• Turn on the power of the router or 13
hub.
• Check the router's or hub's operating —
instructions.
• Contact your line administrator or —
provider.
• If the playback bit rate is high or the 13
server traffic is heavy, stop the other
applications running on the server.
28