Advertisement

Specifications

FM tuner section
KDC-MP249/ KDC-MP2049/ KDC-MP149 only:
Frequency range:
200 kHz space: 87.9 MHz — 107.9 MHz
50 kHz space: 87.5 MHz — 108.0 MHz
Usable sensitivity (S/N= 26 dB): 11.2 dBf (1.0 μV/75 Ω)
Quieting sensitivity (DIN S/N = 46 dB):
19.2 dBf (2.5 μV/75 Ω)
KDC-3051M/ KDC-315M only:
Frequency range (50 kHz space): 87.5 MHz — 108.0 MHz
Usable sensitivity (S/N = 26 dB): 1.0 μV/75 Ω
Quieting sensitivity (DIN S/N = 46 dB): 2.5 μV/75 Ω
Frequency response (±3 dB): 30 Hz — 15 kHz
Signal-to-Noise ratio (MONO): 63 dB
Stereo separation (1 kHz): 40 dB
AM tuner section
KDC-MP249/ KDC-MP2049/ KDC-MP149 only:
Frequency range:
Band 1 (MW):
10 kHz space: 530 kHz — 1 700 kHz
9 kHz space: 531 kHz — 1 611 kHz
Band 2 (SW1):
5 kHz space: 2 940 kHz — 7 735 kHz
Band 3 (SW2):
5 kHz space: 9 500 kHz — 10 135 kHz /
11 580 kHz — 18 135 kHz
Usable sensitivity (S/N= 20 dB):
MW: 31 dBμ (36 μV) / SW: 32 dBμ (40 μV)
MW tuner section
KDC-3051M/ KDC-315M only:
Frequency range (9 kHz space): 531 kHz — 1 611 kHz
Usable sensitivity (S/N = 20 dB): 36 μV
LW tuner section
KDC-3051M/ KDC-315M only:
Frequency range: 153 kHz — 279 kHz
Usable sensitivity (S/N = 20 dB): 57 μV
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
16
Subject to change without notice.
CD player section
Laser diode: GaAIAs
Digital filter (D/A): 8 Times Over Sampling
D/A converter: 24 Bit
Spindle speed: 500 rpm — 200 rpm (CLV)
Wow & Flutter: Below Measurable Limit
Frequency response (±1 dB): 20 Hz — 20 kHz
Total harmonic distortion (1 kHz): 0.01 %
Signal-to-Noise ratio (1 kHz): 105 dB
Dynamic range: 90 dB
MP3 decode: Compliant with MPEG-1/2 Audio Layer-3
WMA decode: Compliant with Windows Media Audio
Audio section
Maximum output power: 50 W × 4
KDC-MP249/ KDC-MP2049/ KDC-MP149 only:
Full bandwidth power (at less than 1 % THD): 22 W × 4
KDC-3051M/ KDC-315M only:
Output power (DIN 45324, +B = 14.4 V): 30 W × 4
Speaker impedance: 4 Ω — 8 Ω
100 Hz ±8 dB
Tone action: Bass:
Middle: 1 kHz ±8 dB
Treble: 10 kHz ±8 dB
Preout level / load (CD): 2 000 mV/10 kΩ
Preout impedance: ≤ 600 Ω
Auxiliary input section
Frequency response (±3 dB): 20 Hz — 20 kHz
Input maximum voltage: 1 200 mV
Input impedance: 10 kΩ
General
Operating voltage (11 V — 16 V allowable): 14.4 V
Maximum current consumption: 10 A
Installation size (W × H × D): 182 mm × 53 mm × 158 mm
Weight: 1.3 kg
This symbol mark indicates that
Kenwood manufactured this
product so as to decrease harmful
influence on the environment.
KDC-MP249
KDC-MP2049
KDC-MP149
KDC-3051M
KDC-315M
CD-RECEIVER
INSTRUCTION MANUAL
© 2010 Kenwood Corporation All Rights Reserved.
GET0672-001A (MW/M2W/M0/M20)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KDC-315M and is the answer not in the manual?

Questions and answers

Summarization of Contents

Specifications Overview
FM Tuner Section
Details of FM reception frequency range and sensitivity.
AM Tuner Section
Specifications for AM reception frequency range and sensitivity.
MW Tuner Section
Technical specifications for Medium Wave band reception.
LW Tuner Section
Specifications for Long Wave band reception.
CD Player Section
Technical specifications for CD playback capabilities.
Audio Section
Output power, impedance, and tone control specifications.
Auxiliary Input Section
Frequency response and voltage for auxiliary input.
General Specifications
Operating voltage, current consumption, dimensions, and weight.
Preparation and Setup
Faceplate Handling
Instructions for attaching, detaching, and caring for the faceplate.
Unit Reset Procedure
Steps to reset the unit to factory settings.
Remote Controller Setup
How to prepare and maintain the remote control.
Basic Operations
Getting Started
Initial setup, clock adjustment, and demonstration mode cancellation.
Listening to the Radio
Tuning, station search, and frequency step adjustments.
Listening to a Disc
Repeat Playback Modes
Options for repeating tracks, folders, or entire discs.
Random Playback Modes
Options for randomizing disc playback order.
Scan Playback Modes
Features for scanning tracks or files on a disc.
Folder/Track/File Selection
How to navigate and select audio files on discs.
Direct Music Search
Method for directly searching tracks using the remote.
Listening to Other External Components
Auxiliary Input Connection
Connecting and using external audio devices via the AUX input.
Function Settings
Audio Control Settings
Adjustments for bass, treble, subwoofer, and system EQ.
System Settings
Configuration for display, clock, and text scrolling.
Installation and Connection
Wiring Connection Details
Diagrams and explanations for connecting power, speakers, and antenna.
Unit Installation Procedures
Steps for physically mounting the unit in the vehicle.
Unit Removal
Instructions on how to detach the unit from the dashboard.

Table of Contents