Disabling The Key Pad Beeper; Programming The Key Functions; Transmitter Time-Out Timer (Tot) - Yaesu FT-250R - ANNEXE 824 Manual

Hide thumbs Also See for FT-250R - ANNEXE 824:
Table of Contents

Advertisement

If the keypad's Beeper creates an inconvenience, it may easily be disabled.
Press the [ F/L ] key, then press the [ 0 ( SET ) ] key to enter the Set mode.
Rotate the DIAL to select Menu Item #16 ("KEY BP
Press the [ F/L ] key to enable adjustment of this Menu item.
Rotate the DIAL to change the setting from ON to OFF.
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
Default FT-250R set mode have been assigned (at the factory) to the [ 7 ( P1 ) ] and [ 8 ( P2 ) ]
keys. These may be changed by the user, if you wish to define another set mode for a keys.
To change the assignment of a key's set mode:
Press the [ F/L ] key, then press the [ 0 ( SET ) ] key, to enter the Set mode.
Rotate the DIAL knob to click through the menu in search of the desired function.
Press and hold in the [ F/L ] key for one second, then press the [ 7 ( P1 ) ] or [ 8 ( P2 ) ] key
to be assigned .
Press the PTT key to save the new setting and exit to the set mode.
T
The TOT feature provides a safety switch which limits transmission to a pre-programmed
maximum duration. This will promote battery conservation by not allowing you to make
excessively-long transmissions, and in the event of a stuck PTT switch (perhaps if the
radio or a Speaker/Mic is wedged between car seats) it can prevent interference to other
users as well as battery depletion. As configured at the factory the TOT feature is set to
OFF, and here is the procedure for activating it:
Press the [ F/L ] key, then press the [ 0 ( SET ) ] key to enter the Set mode.
Rotate the DIAL to select Menu Item #22 ("TOT
Press the [ F/L ] key to enable adjustment of this Menu item.
Rotate the DIAL to set the Time-Out Timer to the desired "Maximum TX" time (1
minute, 2.5 minutes, 5 minutes, or 10 minutes).
Once you've made the selection you wish to use, press the PTT key to save the new
setting and exit to normal operation.
FT-250R O
PERATING
D
ISABLING THE
P
ROGRAMMING THE
T
RANSMITTER
M
ANUAL
Advanced Operation
K
B
EYPAD
EEPER
KEY BP").
KEY BP
KEY BP
KEY BP
K
F
EY
UNCTIONS
-O
T
IME
UT
IMER
TOT
TOT").
TOT
TOT
( TOT )
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft-250rFt-250e

Table of Contents