Advertisement
Table of Contents
Concord 3045z
1. What type of batteries do I use in my camera?
We recommend the camera uses 4 AAA 1.5v Alkaline batteries or 1.2v
NiCd, Ni-MH rechargeable batteries.
purchased at most computer or electronic stores.
For best camera performance it is recommended to use rechargeable
batteries.
2. How to use the flash?
Turn on the camera.
Press the FLASH button to cycle through the various flash modes.
Set the camera in Auto Mode
mode icons appear in the LCD.
The flash is deactivated in Marco mode. Please turn the mode dial to
Tele mode after using the Marco mode to activate the flash,
The following list describes each flash mode:
Auto Flash The camera detects ambient lighting conditions and the
Always on
Off
Note: Make sure that the flash is set to Auto Flash
the batteries are weak, the flash will not be able to recharge and as a result,
it is not able to fire. Please turn off the camera and wait a few seconds
before turning it on again. If the flash still does not fire, please replace the
batteries.
3. How do I activate the self-timer?
This camera has a Self-timer feature which sets a delay between the time
the shutter button is pressed and the time the image is captured.
Follow the steps below to set the Self-timer:
1. Turn the Mode Dial to Auto Mode
2. Press MENU.
3. Press the Right or Left button until the SETTING icon is highlighted.
4. Press the Up or Down button to select the SELF-timer item.
5. Press the SET button to enter the SELF-timer sub-menu.
6. Press the Up or Down button to select the desired self-timer delay 2~10
seconds.
7. Press the SET button to save the setting.
8. Press the MENU button to exit the menu.
4. Is the camera Mac OS compatible?
flash fires if it detects insufficient light.
The flash fires regardless of ambient lighting conditions.
The flash is off.
Rechargeable batteries can be
and Manual Mode
or Always on
or Manual Mode
. The flash
. If
.
Advertisement
Table of Contents
Related Manuals for CONCORD 3045Z
Summary of Contents for CONCORD 3045Z
- Page 1 Concord 3045z 1. What type of batteries do I use in my camera? We recommend the camera uses 4 AAA 1.5v Alkaline batteries or 1.2v NiCd, Ni-MH rechargeable batteries. Rechargeable batteries can be purchased at most computer or electronic stores.
- Page 2 The camera is not compatible with Mac OS. 5. Why do the images on my LCD appear blurry? Your camera comes with a protective film that covers the LCD. If this film is not peeled off, images will appear blurry and foggy on the LCD. Please make sure this film has been removed.
- Page 3 Using Mass Storage is the best way to download files from the camera to your PC. Before connecting the camera to the PC, make sure to install the camera’s driver completely. The computer should be restarted after the driver installation. Follow the steps below to download the files to the PC: 1.
- Page 4 The software bundled with the camera can edit photos simply and easily. If you want to set the photo editing software as the default, just follow the steps below: 1. Select a photo in your PC and right click on it. 2.
- Page 5 To set the language, follow the steps below: 1. Turn on the camera. Make sure that the camera is set to any mode but PC Cam mode or Play mode. 2. Press the MENU button. 3. Press the Right button until the SETTINGS icon is highlighted. 4.
- Page 6 5. Press the SET button to enter the LANGUAGE submenu. 6. Press the Up or Down button to choose your desired language. 7. Press the SET button to save the setting. 8. Press the MENU button to exit the menu. 8.
Need help?
Do you have a question about the 3045Z and is the answer not in the manual?
Questions and answers