Electrolux 350 STEAM GUN Owner's Manual page 7

Round brush and bent nozzle:
Both these attachments can be applied to the straight nozzle (Figure D and D/1) and
the articulated nozzle (Figure E and F). Apply them to the hexagonal end and then
choose the desired angle.
Fig. D Fig. D1
Flexible pipe, Brush for fabrics and glass wiper:
The flexible extension hose (15) must be attached to
the articulated nozzle (2). Then apply the round brush
(12), the angled nozzle (13) the straight nozzle (14)
and then the upholstery nozzle (16) to the hexagonal
end on the pipe.
The upholstery nozzle is provided with a cloth that can
be used for the cleaning of delicate surfaces such as
sofas and armchairs, and with a glass wiper to be fitted
as shown in figure G.
How to fill the boiler while the appliance is being used
When the water in the boiler tank has run out and you press the button (4) no steam
will come out. To refill, carry out the following operations:
a) unplug the appliance;
b) wait for about 10 seconds;
c) carefully unscrew the safety cap (3). Before unscrewing it completely wait for the
hissing noise created by residual steam to stop;
d) unscrew the cap completely and slowly pour a measure of water into the boiler by
means of the funnel (10). Take care not to let any water flow out of the tank during
this operation;
e) screw the cap back on to the appliance;
f) plug the appliance into an electrical outlet.
Fig. E
7
Fig. F
Fig. G