NEC MD304MC - MultiSync - 29.8" LCD Monitor Installation And Maintenance Manual page 3

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC
OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Power Cord Important Information
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
When you use this Display in North America, you should use a North America Hospital Grade power cord.
Plug Type North America
Plug Shape
(green dot
and tag label)
Country U.S.A./Canada
Voltage
NOTE: This product can only be serviced in the country where it was purchased.
Intended Use
MD304MC is intended to be used for displaying and viewing of digital images for diagnosis by trained physicians.
Caution: MD304MC cannot be used for a life-support system.
This unit is designed as component of a final system which is in compliance to IEC60601-1-1 requirements.
Safety Precaution
The unit is for exclusive interconnection with IEC60XXX certified equipment outside of patient environment and IEC 60601-1
certified equipment inside the patient environment.
• Equipment connected to the analog or digital interfaces must comply with the respective IEC standards (e.g. IEC 60950 for
data processing equipment and IEC 60601-1 for medical equipment).
• This device comply with EN60601-1-2, to minimize the interference from other equipment, a minimum 0.5 m distance shall
be kept form other potential electromagnetic sources, such as the Cell Phone.
• To reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To fully disengage the power to
the unit, please disconnect the power cord from the ac outlet. Do not remove cover (or back). No user serviceable parts
inside. Refer servicing to qualified service personnel. The AC outlet shall be readily available and accessible.
North America Customers
Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked "Hospital
Only" or "Hospital Grade". That signal input port need to be connected properly and that any unused signal input port shall not
be accessible for the patient to contact in the patient area after the LCD is integrated into a medical system.
Federal law restricts this device to sale by or on the order of a licensed healthcare practitioner.
European Customers
Unpacking, Installation and calibration of this display should only be done by authorized and trained personnel. Any
installation done by a non-authorized person is done under his own risk and we accept no responsibility in any device
malfunctioning.
Medical Imaging
MD304MC is designed for 2560 x 1600 medical imaging.
WARNING
CAUTION
European
Continental
EU (except U.K.)
120 230
English-1
U.K. Chinese
U.K. China
230 220
Japanese
Japan
100