Table of Contents
Advertisement
HEZ2460S
HEZ3060S
HEZ2460S/HEZ3060S
115 35 77-10 (004)
OWNER'S/OPERATOR'S
MANUAL
STICK EDGERS
WARNING
The engine exhaust from this
product contains chemicals
known to the State of California to
cause cancer, birth defects or
other reproductive harm.
WARNING
Before using our products,
please read this manual carefully
to understand the proper use of
your unit.
This spark ignition system complies with
the Canadian standard ICES-002.
U
S
US-1
Advertisement
Table of Contents
Related Manuals for RedMax HEZ2460F
Summarization of Contents
OWNER'S MANUAL
STICK EDGERS
Manual for RedMax Stick Edgers.
SAFETY FIRST
WARNINGS IN THE MANUAL
Explains warning symbols and their importance.
Parts location
Specifications
Technical details for HEZ2460S and HEZ3060S models.
Warning labels on the machine
Symbols on the machine
Explains relief symbols used for safe operation.
For safe operation
Basic safety rules
Essential rules for operating the product safely.
Personal protective equipment
Recommended PPE for safe operation.
Starting the engine
Engine starting procedures and warnings
Steps and warnings for starting the engine.
Using the product
Operating guidelines
Proper techniques for using the stick edger.
Safe Handling and Storage
Transport and fuel safety
Guidelines for transporting and handling fuel.
Storage recommendations
Proper storage procedures for the unit and fuel.
Noise and vibration protection
Precautions against noise and vibration exposure.
Maintenance Overview
General maintenance checks
Initial checks before using the edger.
Disposal
Disposal regulations
Adhering to local regulations for machine disposal.
Set up
Mounting other parts
Instructions for assembling components like driveshaft and handle.
Fuel Requirements
Gasoline specifications and warnings
Details on fuel type, octane, and alternatives.
Oil specifications and warnings
Recommended two-stroke engine oil types.
Fuel Mixing and Filling
How to mix fuel
Guide for mixing gasoline and oil ratios.
Fueling the unit
Steps for safely adding fuel to the tank.
Operation
Adjusting wheel height
How to set the cutting depth using wheel height.
Starting the engine
Step-by-step guide to start the engine safely.
Operation Adjustments
Adjusting throttle cable
Setting the play in the throttle cable for proper function.
Adjusting idling speed
Correcting engine idle speed issues.
Edging techniques
Proper methods and tips for edging lawns effectively.
Maintenance
Pre-use checks
Critical items to check before operating the edger.
Maintenance chart
Schedule for system component checks and service intervals.
Component Maintenance
Air filter and fuel filter
Cleaning and checking air and fuel filters.
Spark plug maintenance
Servicing the spark plug for optimal performance.
Muffler and spark arrester
Inspecting exhaust system components for safety.
Gear case lubrication
Lubricating the gear case with appropriate grease.
Blade and Cooling System Maintenance
Blade mounting and direction
Installing the cutting blade correctly with proper torque.
Intake air cooling vent cleaning
Ensuring proper engine cooling by cleaning vents.
Protector replacement
Instructions for replacing the protective guard.
Procedures after 100 hours of use
Major service tasks required after 100 hours.
Troubleshooting Guide
Starting failure issues
Diagnosing and fixing common engine starting problems.
Engine running issues
Addressing problems with engine operation and re-starting.
FEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT
Manufacturer's Warranty Coverage
Details on what the emissions control system warranty covers.
Owner's Warranty Responsibilities
Owner's duties for maintaining warranty coverage.
Warranty Claims and Service
What is not covered by warranty
Exclusions from warranty coverage.
How to file a warranty claim
Steps to submit a warranty claim and obtain service.
Need help?
Do you have a question about the HEZ2460F and is the answer not in the manual?
Questions and answers