curt 13368 Manual

13368
11/18/2008
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
ITEM QTY PART NUMBER
1 4 1/2-13 x 2"
2 4 FW12
3 4 9_16 WASHER USS FLAT
4 2 CM-SP16
5 4 HFN 1213
TOOLS REQUIRED
3/4" WRENCH
3/4" SOCKET
RATCHET
TORQUE WRENCH
ACCESS HOLE
3
2
1
MAIN BODY STRAP
HITCH WEIGHT: 35 LBS.
INSTALL TIME: 15 MINUTES
INSTALL NOTES:
- REMOVE SPARE (OPTIONAL)
INSTALLATION STEPS
Note: Removal of the spare tire may ease hitch installation, although it is not necessary.
1. Raise hitch into position and fasten the hitch to the bumper brackets using the main body straps as shown.
2. Attach remaining fasteners as shown, placing (2) 9/16" washers inside the access hole in the bumper bracket
on each side. Use the hitch and CM-SP16 spacer to retain the washers.
3. Torque all fasteners to 75 lb-ft.
4. Reinstall spare tire if it was removed for hitch installation. Make sure the spare tire does not contact the bolts.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
FORD F-150
Parts List
DESCRIPTION
HEX BOLT
FW, 12, ZP
FLAT WASHER
.250 x 1.50 x 2.00" RND HOLE SPCR
HEX FLANGE NUT
(SHOWN BROKEN FOR CLARITY)
5
4
BUMPER BRACKET
(SHOWN BROKEN FOR CLARITY)
6,000 LBS. TRAILER WEIGHT &
11,000 LBS. TRAILER WEIGHT &
ACCESS HOLE
BUMPER BRACKET
600 LBS. TONGUE WEIGHT.
1,100 LBS. TONGUE WEIGHT
MAIN BODY STRAP