AmeriLite 02-AZ-CS98-B Manual

Tools Needed:
4 Splicer's
Step 3: Pull the headlight
assembly straight out of the
housing.
Step 5: Remove the turn signal
socket from the headlight.
Make sure all functions work
properly before driving.
Description: Projector Halo Headlights
Application: 98-04 Chevy S-10 / Blazer
Step 1: Locate the two clips
located at the top of the headlight.
Step 4: Unplug the high and low
beam harness from the bulbs.
Step 6: Plug the headlight
harness to the new headlight
Read complete instructions
before installation!
Improper installation may
void warranty
Step 2: Remove the two clips
which hold the headlight to the
frame.