Software Installation - COMPRO S350 - STARTUP Manual

Software Installation

After installing the S350 PCI card and cables in your computer, you should
restart it and follow these steps to install the software.
Step 1. After restarting, Windows will detect your VideoMate S350 card and
start the Add/Remove Hardware Wizard, prompting you to install the
VideoMate TV drivers. Please press Cancel and go to the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on "setup.exe" on the installation CD.) You can choose
Complete to install all necessary software (VideoMate TV drivers,
ComproDTV 2, ComproDVD 2, Ulead PhotoExplorer 8.5 SE) or
choose Custom to select item by item. Compro recommends you
choosing Complete.
Step 3. If you see the Windows Logo testing message as below, please press
"Continue Anyway" to proceed.
Step 4. Press Next to install ComproDTV 2, ComproDVD 2, Ulead
PhotoExplorer 8.5 SE.
Step 5. When installation completes, press Finish to restart computer.
8
Continue