Remote Wake Up - COMPRO S350 - STARTUP Manual

Remote Wake Up

Introduction
VideoMate S350 features the Remote Wake Up function for greater
convenience. After install the TV card driver, put batteries in the remote control.
Pressing one of the PVR/TV, FM, DVD/VCD buttons will start your computer.
Note
There will be a two second delay before the PC powers on. This feature cannot
logon your system. You may need to enter your user name and password.
Remote Shut Down
There are two situations for the operation.
When not watching TV, i.e. no ComproDTV running:
Just press the SLEEP button on the lower-right corner on the remote keypad,
you will see a dialog as shown below. Program will countdown 20 seconds to
shutdown the computer. If you don't want to shut down the computer, please
press the SLEEP button again, in other words, pressing the SLEEP key a
second time is the same as pressing the "Cancel" button. You may also use
your mouse to press the cancel button. Press OK to immediately shutdown the
computer.
When watching TV, i.e. ComproDTV is running:
Just press the SLEEP button on the lower-right corner on the remote keypad
repeatedly, you will see the text on the screen turns to SLEEP OFF, SLEEP ON
- 30 MINUTES, SLEEP ON - 1 HOUR, SLEEP ON - 2 HOURS, and
SHUTDOWN. When the text shows SHUTDOWN, the program will countdown
20 seconds to shutdown the computer. If you don't want to shutdown the
computer, please press the SLEEP button again.
9