Related Manuals for COMPRO VideoMate S700
Summary of Contents for COMPRO VideoMate S700
- Page 1 VideoMate S700/S900 USB 2.0 Satellite TV Tuner Box Start Up Guide Compro Technology, Inc. www.comprousa.com...
- Page 2 Copyright © 2001-2011. Compro Technology, Inc. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Compro Technology, Inc. Compro, VideoMate and the Compro logo are trademarks of Compro Technology, Inc.
-
Page 3: Table Of Contents
Table of Contents Product Introduction ..............3 Key Features ................3 System requirements ............... 4 Package Contents ............... 5 Hardware Installation ..............6 Software Installation ..............7 MyTheatre and driver installation ..........7 DVBIPData installation ............. 11 Software Setting ................14 MyTheatre ................. -
Page 4: Product Introduction
Product Introduction The VideoMate S700 and S900 satellite TV tuner box are designed to watch satellite TV or listen to radio programs on your PC or laptop. Please read the instructions carefully before installation. Key Features VideoMate S700 USB 2.0 DVB-S TV Tuner Box ... -
Page 5: System Requirements
Supports popular ProgDVB and DreamDVB 3 party digital TV applications System Requirements (Recommended Platform) PIII 1.7 GHz for SDTV viewing P4 3.0 GHz for HDTV viewing and recording Memory: 512 MB (1.0GB recommend) Available USB 2.0 port ... -
Page 6: Package Contents
Package Contents VideoMate Quick Installation Remote Control S700 or S900 AAA Batteries Guide TV tuner box Power adapter Software CD USB 2.0 cable (I/P 100-240V, O/P DC 12V/1A) -
Page 7: Hardware Installation
Hardware Installation Step 1: Connect the signal cable (from LNB), DC power and USB cable to your S700 or S900 TV box Signal Input (LNB IN) DC Power Step 2: Connect USB Cable to the USB port on your PC or laptop... -
Page 8: Software Installation
Software installation MyTheater and driver installation Step 1: When you connect the S700 or S900 USB digital TV box to your PC. “Found New Hardware Wizard” dialog will pop out; choose ”No, not this time” and click ”Cancel” Step 2: Insert the software CD into your CD-ROM, Installshield will automatically start &... - Page 9 Step 3: To start software installation; press “Next” button on each installation step. Step 4: Mark ”I accept the terms in the License Agreement” and click “Next”...
- Page 10 Step 5: Choose install location and click “next” Step 6: Choose start menu folder and click ”Install”...
- Page 11 Step 7: After installation complete, please click “Next” Step 8: Completing MyTheatre and driver setup, Please click “Finish”...
-
Page 12: Dvbipdata Installation
DVBIPData installation Step 1: Insert the Drive CD into your CD-ROM, .The Installshield will automatically start & follow window will appear. If the window doesn’t appear, start Installshield from Drive CD manually. Click on “Install DVBIPData”. Step 2: DVBIPData Setup, Please click “Next”... - Page 13 Step 3: Please choose path to install and click “Next” Step 4: Choose start menu folder and click “Install”...
- Page 14 Step 5: Installation completed, Please click “Next” Step 6: Installation completed, Please click “Finish”...
-
Page 15: Software Setting
After splash-screen, you will see main window of application. Click on video area (at the first run it will look like large black area) by right mouse button. Pop-up menu appears. Follow menu: Settings General Settings and choose the “Hardware” tab. Please select the “Compro DVB-S Receiver” for signal reception. - Page 16 Step 3: After select the device, please click on video area by right mouse button. Pop-up menu appears. Follow menu: Settings Tuner settings & Scan…...
- Page 17 Step 4: For LNB/Transponders settings, you will see settings for satellites and transponders. (1). Find and click on required satellite on list. Fill appropriate LOF1, LOF2, SW values. Please read instruction of LNB convertor you use. Don’t forget to click on “Apply” button when you finish setup satellite LNB parameters.
- Page 18 Step 5: DiSEqC Switch Settings. Mark “First DiSEqC Switch” and choose Committed, LNB1..LNB4 (depend on required port of switch) Step 6: Scan Dialog: You can watch scanning process in this window. You may interrupt scanning by clicking “stop” button. After scanning completed, close scanning window and then LNB dialog.
- Page 19 Step 7: Open pop-up menu by clicking right mouse button on main window, then follow steps below: Display Video On/Off. Make sure there is a mark sign on this option. If there is no such mark then click on it. Step 8: Click on any channel name with green “V”...
- Page 20 Other Setting: Click on video area by right mouse button. Pop-up menu appears. Follow menu: Settings ->General settings… Miscellaneous: You can setting more detail functions, such as Full screen, LNB power turn off, Database backup, sleep timer…etc...
- Page 21 Display: You can set up display option. Interface: You can choose the language by this page.
- Page 22 Recording: Setting your recording option. such as recording destination, file name format & recording format. AutoGraph: Setting MPEG-2/H.264 AVC Decoder you preferred; if you are using Windows MCE, Microsoft Decoder is recommended.
- Page 23 IVR/OSD: Setting Resolution, Aspect Ratio & On-Screen-Display (OSD). TimeShift: Setting variants for TimeShift feature such as: buffer length, recording speed & play speed…etc.
- Page 24 EPG: Setting EPG (Electronic Program Guide) Shortcuts: Setting Hotkey & Shortcuts by double clicking the function you want to change.
- Page 25 Volume/Audio: Setting Audio options Subtitles: Setting Subtitle language you prefer...
-
Page 26: Dvbipdata
DVBIPData Step 1: After installation finished, you will see DVBIPData icon on your Desktop. Run it by double clicking the icon. DVBIPData icon on your desktop Step 2: After splash-screen, you will see main window of application. Please click “New”... - Page 27 Step 3: You need to fill in the parameters for your satellite, For example: Frequency, Symbol Rate, LNB, Polarity, DiSEqC, 22K, and click “Lock Transponder” Note: Once the transponder is locked, you will see Strength & Quality indicators in Blue bar and the LockStatus icon turns Blue. Step 4: Please click “Network Settings”...
- Page 28 Step 5: DVBIPData allows you to change MAC Address by yourself, Click “Change”, Enter the "MAC Address" you need in the column as below Step 6: When you finish all setup, don’t forget to click “Apply” Note: DVBIPData is a stable and easy satellite internet software, with which you could surf high speed broadband via satellite, but you need to apply for a valid account from your local Satellite Internet ISP before using DVBIPData.
-
Page 29: Remote Control
Remote Control The outlook of remote control and button definitions has shown as below:... - Page 30 Remote control keys definition Key Name Default Action Live Mode Play Mode WMC Mode Mute Mute Mute Mute Power Exit Shut Down Shut Down Recall Previous Channel Event Into OSD Favorites OSD File List Vol+ Vol+ Vol+ Vol+ Vol- Vol- Vol- Vol- Channel+...
-
Page 31: Troubleshooting
Troubleshooting My device can’t work correctly. 1. Please unplug device from PC/Laptop and re-connect to another USB port again. 2. Please check device management and see if there is any exclamation mark or not. 3. Please re-install latest driver again. ... - Page 32 How to check Device Manager? Step 1: Click “Start” on the bottom-left corner. (Windows logo on Vista / Windows 7) Step 2: Click right-button on ”Computer” (”My Computer” on Windows XP) Step 3: Click on ”Manage” (”Device Manager” on Windows XP) Step 4: Double click ”Device Manager”...