Page 2
● The wall must be capable of supporting five times the weight of the TV and mount Safety Caution combined. ● Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. NOTE: Not all hardware included will be used. Sliding block Wall plate bar Bolt M8x20mm Allen Key M8 Washer...
Page 4
Parts and Hardware Lag Bolt M8x60mm <16mm Min. Wood Stud Size: (5/8") nominal 4"(102mm) 24"(609.6mm) actual 3 1/2"(89mm) /16"(406.4mm) Min. Wood Stud Size: nominal 2"(51mm) actual 1 1/2"(38mm) Centre line Again, find another wood stud Bolt Head UP! 24"(609.6mm) /16"(406.4mm) Centre line...
Page 5
CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
Need help?
Do you have a question about the MD5232 and is the answer not in the manual?
Questions and answers