HUSKY LINERS Weatherbeater 99581 Care And Use Instructions

Custom vehicle floor protection

Download this manual

Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new front floor liners are

custom molded to fit your Toyota Tundra CrewMax truck. The liners are made to take the place of your factory

floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor

liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

well. Use of Armor All

INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA

TUNDRA CREWMAX FRONT FLOOR LINERS

LEFT OR DRIVER'S

BEFORE INSTALLING YOUR LINERS REMOVE ANY OTHER FLOOR MATS FROM THE VEHICLE.

BEGIN INSTALLATION BY MOVING YOUR FRONT SEATS TO THEIR MOST REARWARD POSITION. WITH

THIS DONE INSTALL THE DRIVER'S SIDE LINER ATTACHING IT TO THE FACTORY TWIST-LOCK

FASTENERS. IF YOU DO NOT HAVE TWIST-LOCK FASTENERS IN YOUR VEHICLE PLEASE CONTACT

YOUR RETAILER OR CALL HUSKY LINERS AT 800-344-8759. NOTE THAT THE LINER SETS OVER THE TOP

OF THE TWIST-LOCK FASTENER AND THEN THE TOP OF THE FASTENER IS TWISTED 90º TO SECURE THE

LINER IN PLACE (SEE ATTACHED PHOTO). CONTINUES ON BACK OF PAGE.

View the Husky Liner Lifetime Warranty at

CARE AND USE INSTRUCTIONS

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

SIDE

www.huskyliners.com/lifetime-warranty

RIGHT OR PASSENGER'S SIDE

9958 Installation Instruction 3 pages with warranty

or Glass Plus

work

09/19/2013

Need help?

Do you have a question about the Weatherbeater 99581 and is the answer not in the manual?

Page 1 CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new front floor liners are custom molded to fit your Toyota Tundra CrewMax truck. The liners are made to take the place of your factory floor mats.
Page 2 IN YOUR PACKAGING YOU WILL FIND A COMPONENT BAG WITH A FASTENER THAT WILL BE USED TO SECURE THE PASSENGER SIDE LINER IN PLACE. LOCATE THE FASTENER IN YOUR PACKAGING, REMOVE THE FASTENER AND UNSCREW THE CAP FROM THE BASE (SEE IMAGE 1 BELOW). NEXT INSERT THE THREADED PORTION OF THE BASE INTO THE HOLE IN THE PASSENGER SIDE LINER, INSERTING IT FROM THE BACK SIDE OF THE LINER (SEE IMAGE 2 BELOW).
Page 3 CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new rear floor liner is custom molded to fit your Toyota Tundra CrewMax trucks. The liner is made to take the place of your factory floor mats.