HUSKY LINERS WEATHERBEATER 9410 Care And Use Instructions

Thank you for selecting a WeatherBeater™ Floor Liner from Husky Liners. Your new front floor liners are
custom molded to fit your Ford Ranger SuperCrew truck. The liners are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR
FORD RANGER SUPERCREW FRONT FLOOR LINERS
LEFT OR DRIVER'S SIDE
TO EASE INSTALLATION OF YOUR FRONT LINERS, FIRST MOVE BOTH FRONT SEATS TO THEIR
MOST REARWARD POSITION. THEN, INSTALL THE LINERS, ORIENTING THEM AS SHOWN
ABOVE. ONCE YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.
TAKE CARE THAT LINERS ARE SNAPPED OVER THE FACTORY FLOOR MAT RETAINING POSTS.
View the Husky Liner Lifetime Warranty at
WEATHERBEATER
FLOOR LINERS
CARE AND USE INSTRUCTIONS
® ®
, Son-of-a-Gun or similar items is discouraged as these products make the liners slick.
www.huskyliners.com/lifetime-warranty
™
RIGHT OR PASSENGER'S SIDE
PT #9410
® ®
or Glass Plus work
9410_Installation Instruction WL.doc
10_18_2019