Nitecore NU32 User Manual

NU32
• White and Red Triple Outputs
• USB Rechargeable
• Extreme Lightweight
Technical Data
FL1 STANDARD TURBO HIGH MID ULTRALOW
550 190 33
Lumens Lumens Lumens Lumen
*1h 17h 50h
125m 77m 25m
3900cd 1480cd 150cd
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/NEMA
FL1, using the built-in Li-ion battery (3.7V 1,800mAh) under laboratory conditions. The data may vary in real
world use due to different battery usage or environmental conditions.
* The runtime for TURBO mode is tested without the temperature regulation.
Warranty Service
All NITECORE ® products are warranted for quality. Any DOA / defective product can
be exchanged for a replacement through a local distributor/dealer within 15 days
of purchase. After that, all defective / malfunctioning NITECORE
repaired free of charge within 24 months from the date of purchase. Beyond 24
months, a limited warranty applies, covering the cost of labor and maintenance, but
not the cost of accessories or replacement parts.
The warranty will be nullified if
1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties;
2. the product(s) is/are damaged due to improper use.
For the latest information on NITECORE
local NITECORE distributor or send an email to service@nitecore.com
®
※ All images, texts and statements specified herein this user manual are for
reference purposes only. Should any discrepancy occur between this manual and
information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves
the rights to interpret and amend the content of this document at any time without
prior notice.
High Performance
Rechargeable Headlamp
AUXILIARY FLASHING
RED
LEDS (CRI) RED
1 19 9 9 550
Lumens Lumens Lumens Lumens
330h 25h 38h 45h
5m 10m 7m ─
8cd 23cd 14cd ─
1m (Impact Resistant)
IP67 Rated
products can be
®
products and services, please contact a
®
(English) NU32 User Manual
Features
• High performance rechargeable headlamp
• White and red dual outputs
• A CREE XP-G3 S3 primary white LED capable of outputting 550 lumens
• Two auxiliary LEDs with high color rendering capability: CRI ≥90 provides output at 19 lumens
• Red light illumination
• Built-in 1800mAh Li-ion battery
• USB rechargeable with onboard charging circuit
• Dual switches design offers easy one-handed operation
• 4 brightness levels and 2 special modes available
• A power indicator beneath switches indicates the remaining battery power (Patent No. ZL201220057767.4)
• Flood beam profile with 60° adjustable angle
• Made from durable PC materials
• Compact and lightweight
• Impact resistant to 1 meter
Specifications
Dimensions: 63mm×43.5mm×31.5mm
Weight:
Operating Instructions
Dual Switches
The Power Button controls the white light,
and the R Button controls the red light.
White Light Illumination
With the light turned off, press the Power Button to turn the white light on.
1. Within an interval of 3 seconds when the light is on, pressing the Power Button repeatedly to cycle through
ULTRALOW-MID-HIGH-Standby.
2. Pressing the Power Button when no action is taken after 3 seconds will turn the light off.
Access to TURBO
With the light turned on, press and hold the Power Button for 1 second to enter TURBO mode (550 lumens).
Note: NU32's TURBO output diminishes after 30 seconds to prevent overheating.
White Auxiliary LEDs
With the light turned off, press and hold the Power Button for 1 second to activate the 2 onboard white auxiliary
LEDs for flood illumination. Press the Power Button again to turn the white auxiliary LEDs off.
Red Auxiliary LEDs
With the light turned off, press the R Button to turn the red auxiliary LEDs on. Press the R Button repeatedly
within an interval of 3 seconds to cycle through RED – FLASHING RED - Standby. Pressing the R Button when
no action is taken after 3 seconds will turn the red auxiliary LEDs off.
Special Modes (SOS / Beacon)
With the light turned off, press and hold the Power Button for 3 seconds to enter SOS. Press the Power Button
again within 3 seconds and switch to BEACON Mode. To exit special mode, press the Power Button when NU32
is in BEACON Mode, or press the Power Button when no action is taken after 3 seconds.
SOS BEACON
Lockout/Unlock
550
With the light turned off, press and hold both the Power Button and the R Button simultaneously until the built-
Lumens
in red indicator flashes once to enter lockout mode. All LEDs will be rendered inoperative in lockout mode. To
unlock, press and hold both buttons until the red indicator flashes once again.
─ ─
Power Indicator
─ ─
With the light turned off, press and hold the R Button for 1 second to activate the built-in red power indicator.
The power indicator will flash to indicate the remaining power of the batteries:
─ ─
1. Flashing three times indicates that the power is above 50%;
2. Flashing twice indicates that the power is below 50%;
3. Flashing once indicates that the power is below 10%.
Note: The product needs to be recharged when the output appears to be dim or the product becomes
unresponsive due to low power.
Charging Function
NU32 is equipped with an intelligent charging system. Please
charge the battery before the first use.
Connecting to the External Power: Raise the micro USB port
cover to expose the charging port, connect the port to a power
supply with a USB cord to initiate the charging process. Fully
charging the product takes approximately 3.5 hours. When fully
charged, the standby time is approx. 12 months.
Charging Indicator: When the product is connected to a power
supply, the built-in red power indicator will be lit to indicate
charging in progress. It will turn green when charging completes.
Cautions
1. CAUTION! Possible dangerous radiation! Don't look into the light! Maybe dangerous for your eyes.
2. Please recharge the product every 3 months when left unused for a prolonged time.
3. When the flashlight is kept in the backpack, please activate the Lockout Mode to prevent accidental
activation.
4. DO NOT disassemble, modify or reconstruct the product, otherwise the warranty will be nullified, and the
product might be damaged.
SYSMAX Innovations Co., Ltd.
TEL:
FAX:
E-mail:
Web:
Address：
(2.48" ×1.71" ×1.24", bracket included)
76.4g (2.69oz, bracket included)
99.5g (3.51oz, bracket and head band included)
+86-20-83862000
86-20-83882723
info@nitecore.com
www.nitecore.com
Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,
Guangzhou,510623, Guangdong, China
Thanks for purchasing NITECORE!
Please find us on facebook : NITECORE Flashlight
Accessories
USB Cable, Head Band
R Button
Power Button
Made in China
NU05033220