AUDIOLINE OSLO 580 Operating Instructions Manual page 51

Cordless digital dect telephone
Table of Contents

Advertisement

Available languages

Available languages

11.8.2
Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 3 minutes long. The re-
spective, pre−recorded outgoing message is replaced by the one you record. The pre−recorded
outgoing messages can be restored simply by deleting your own outgoing messages (refer to
Chapter 11.8.4).
Using the base station:
2 sec
Press and hold
or
,
Release
or
Using the handset in the OGM Settings menu:
or
Record OGM ,
or
e.g.: Ans & Rec ,
,
11.8.3
Playing back outgoing message
Using the base station:
Using the handset in the OGM Settings menu:
Play OGM
or
or
e.g.: Ans & Rec ,
11.8.4
Deleting your own outgoing message
After deleting your own outgoing message, the pre−recorded message is automatically reactiva-
ted.
Using the base station:
Using the OGM Settings menu on the handset:
Delete OGM
or
or
e.g.: Ans & Rec ,
11.9
Messages / Memos
11.9.1
Memory capacity
The answering machine can digitally save up to 59 incoming messages with a total length of 13
minutes. The maximum length for each incoming call is 3 minutes. If the caller's message is lon-
ger, the call is disconnected. If there is a pause in excess of 8 seconds during recording, the call
is automatically ended. When the answering machine memory is full, the answering mode wio-
thout recording" is activated automatically.
11.9.2
Memos
A memo is a message left on the answering machine for other answering machine users and is
treated in the same way as an incoming message. A memo cannot be longer than 2 minutes.
Using the TAM Settings menu on the handset:
or
Record Memo ,
,
− Telephone Answering Machine −
Activate Setting mode
Record for OGM 1 or 2
Speak your message after the acoustic signal
Stops recording of OGM 1 or 2
Select the function and confirm
Select OGM 1 or OGM 2 and confirm
Speak your message after the acoustic signal
End recording
Play outgoing message currently set
,
Select the function and confirm
Select OGM 1 or OGM 2 and confirm
Play the outgoing message currently activated
Press the button during playback to delete the OGM
,
Select the function and confirm
Select OGM 1 or OGM 2 and confirm
Select the function and confirm
Speak your message after the acoustic signal
End recording
51

Advertisement

Chapters

Table of Contents
loading

Table of Contents