AUDIOLINE OSLO 580 Operating Instructions Manual page 38

5.1 Taking a call
and ,
When the handset is ringing, press the
lume.
If the ringing tone has been deactivated on the handset, incoming calls are only indica-
ted by the base station (as long as the base ringer has not been deactivated).
5.2 Handsfree
Use this function to telephone with your hands free.
5.3 Taking two calls
You will hear acoustic signals (call waiting) if a second call is received while you are talking on the
telephone. The number of the second caller appears in the display. Press the buttons below in
the sequence described to switch between the two callers, the connection to the other caller is
put on hold.
,
Caution: The functions for phone number display, holding calls and call waiting are
supplementary services offered by your telephone network provider. Contact your net-
work provider for further information.
5.4 Making a call
If you enter a wrong digit:
2 sec
It is also possible to press the Call button
Then enter the required telephone number. It is not possible to correct wrong digits individually
using this dialling procedure.
5.5 Dialling pause
In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or 0")
in order to obtain the dialling tone for an outside line. When using some older private branch ex-
changes, it takes a little time before the dialling tone becomes audible. Particularly in the case of
such private branch exchanges, it is useful to insert an automatic pause after the number for the
outside line so that the number can be dialled in a continuous process without having to wait for
the dialling tone.
Between pressing the number for an outside line and the phone number required, press the
button once. P" appears in the display. After dialling the number for the outside line, the telephone
then waits 3 seconds before dialling the actual phone number.
The pause can also be entered with the phone number in the phone book.
5.6 Redialling
The telephone stores the last ten numbers dialled in a redialling list.
or ,
If a phone number has been stored in the phone book, the name associated with it ap-
pears in the display.
5.6.1 Deleting all the numbers from the redialling list
2 sec ,
5.6.2 Deleting a number from the redialling list
, or
,
38
− Telephoning −
Take the call
End the call
or
Switch the function on or off
Switch to the other caller
Enter the phone number (max. 32 digits)
Dial the phone number
Press briefly: Deletes the last entry.
Press longer: Deletes the entire phone number.
first to obtain the dialling tone for an outside line.
Open the redialling list (the last phone number dialled
appears in the display)
Select an entry and dial the number
Open the redialling list
Delete the entire list
Select the entry to be deleted
Delete the individual entry
button to adjust the ringing vo-