Croydex AD103000 Manual

AD103000/AD103022 L-Shape Telescopic Rod
Before drilling, check for hidden cables or pipes. The use of a residual current device (RCD) is recommended
when working with power tools.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used. Always ensure that the drill hole
passes through the central tiled area rather than the grouted area. To prevent damage to the tile, mask the area around
the hole with tape before drilling.
Clean surfaces with a damp cloth and wipe dry using a soft cloth. Do not use detergents or abrasive cleaners
as these may damage the surface of the fitting.
Rod Components
Telescopic Rod Assembly, 70cm Tube, Elbow Joint x 1, Wall Bracket x 2. Wall Bracket Cover x 2,
Tools and Fixing Pack
Installation
Press in locking mechanism
and insert into tube