Croydex Arun Manual

Arun Pivoting Mirror Cabinet
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to
ensure that your pivoting mirror cabinet is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following product:
WC880122 - Arun Large Pivoting Mirror Cabinet
WC880222 - Arun Tall Pivoting Mirror Cabinet
Tools Required - not supplied
Cross head screwdriver, Large flat head screwdriver, Pencil, Spirit level, Drill, 8mm Masonry drill
bit, 8mm Ceramic drill bit (Optional)
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN

Home Safety Advice

• It is recommended that two people fit this product to ensure that it is fitted safely.
• Always take care when using power tools, particularly in the bathroom.
• Always check for hidden cables and pipework before drilling and take extreme care if there is
any water in the working area.
• It is advisable to use a residual current circuit breaker (RCCB).
• Always wear suitable protection when drilling.
• Do not use power screwdrivers to assemble this product.
• Do not overload the cabinet, maximum safe working load per shelf is 2kg evenly distributed.
• Do not strike the product with hard or sharp objects.
• Do not place hot objects onto shelf surfaces.
• Do not position in close contact with a heat source.
• Periodically check that the two pivot nuts are tight and have not loosened during use.

Product Care

• To retain the best quality finish, clean product regularly with a soft cloth and mild detergents.
• Do not use abrasive or chemical cleaners as these will damage the product.
• Spray cleaning liquids onto the cloth and not directly onto the backing panel or painted steel
shelves.
1
CAB 070 R05