Croydex AP130422 Installation Manual

White Adjustable Seat with Arms
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to ensure
your adjustable seat is fitted safely and retains its high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following product:
AP130422 - White Adjustable Seat with Arms
Tools required - not supplied
Screwdriver appropriate to fixings.
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN

Product Care

To retain the best quality finish, clean product regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners as these will damage the product.
Dry the adjustable seat after use.
Do not strike the product with hard or sharp objects.

Product Location

The adjustable seat must sit flat within the bathroom or within a shower tray.
Curved surfaces of the bathtubs are not acceptable.
Cautionary Note
Please ensure all legs are equal length, the seat is level and all pins are secured in position.
Take care not to extend leg beyond its furthest extension. If the leg is extended beyond this point please
note that spring tenstion will propel the pin from the seat, so take care when adjusting the height.
If the pin and spring are removed from the leg, re-insert these components as shown in Fig.A.
Please note that the spring and pin need to be compressed in order to re-insert the leg into the seat.
Fig.A
1
S&H 046 R02