Advertisement
Quick Links
Technical Support and E-Warranty Certificate
www.vevor.com/support
ICE CREAM MACHINE
MODEL:CK400PRO-A19
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Related Manuals for VEVOR CK400PRO-A19
Summary of Contents for VEVOR CK400PRO-A19
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support ICE CREAM MACHINE MODEL:CK400PRO-A19 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
- Page 3 Content Safety Precaution - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 Exploded Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4 Installations&...
- Page 4 Safety precaution ◆Before using the appliance, please read this user manual to ensure that you gain the maximum benefit from it. WARNING: ◆This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 5 ◆Do not damage the refrigerant circuit. ◆Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. ◆Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. ◆Note: This appliance contains flammable refrigerant R290 and foaming agent cyclopentane.
- Page 6 keep safe; ◆Use the power which is consistent with the one in the nameplate, and the bias voltage is less than ± 10% of rated voltage. The wiring must be done by the professionals; WARING ◆The wire must be replaced by the manufacturers or its repair department or workers of the similar field;...
- Page 7 • Reorient or relocate the receiving antenna. • Increase the distance between the product and receiver. • Connect the product to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for assistance. Exploded Diagram Part name Part name...
- Page 8 Driven pulley Electric box Belt condenser Drive pulley Caster Gear reducer compressor Product Specification Model No：CK400PRO-A19 Refrigerant and Injection(g)：R404A(520g) Climate Type:SN/N/ST Froth Material:C5H10 Shock Protection Type: I Power:3300W Net Weight:172Kg Input:AC220-240V 60Hz Dimension:540X720X1360mm - 5 -...
- Page 9 Electric Schematic Installations& Adjusting A、unpack & inspect 1）Open the wooden case by nipper pliers. 2）Remove the foam. 3）Inspect carefully whether there is defective appearance or not. 4）Check the accessories with packing list. 5）The surface is protected by a plastic film and should be removed before use.
- Page 10 and each side for proper ventilation. Keep 50cm space from all sides for ventilation. The machine should be shaded from the sun and should not be located too close to the units that radiate excessive heat. c、 install the handle and drip tray through the sticker and exploded diagram 2)POWER SUPPLY a、Select the proper power supply according to the voltage and power on...
- Page 11 pattern lightens and hear the beater works. Step 3: Press the key of “auto”, you can see the corresponding indicating pattern lightens as well as hear the beater works. 3 seconds later, the refrigerating system starts to work. a)Clearing & Sterilizing Step 1: Prepare 5-6 liters of warm water, mix with food detergent according to manufacturer’s specifications.
- Page 12 a、The temperature of the sterilizing solution can not overpass 60℃, or else it will damage the spare parts. b、Draw off all the water in the hopper after clearing, or else it will damage the beater while the compressor is running. c、While press the key of “clean”, pay attention to the Notice indicating pattern in order to avoid pressing the wrong key.
- Page 13 When adding mix to the hopper tank, please do not flood the top of the feed tube with the mix. Notice Operation Instruction A.Key Instruction 1－digital displayer 5－Standby key 2－adjust key（up） 6－clean key - 10 -...
- Page 14 3－adjust key（down） 7－auto key 4－defrost This machine without pump a. Hardness setting In the mode of standby, Press the “ ” or “ ” key, hold for 2 seconds, the hardness setting number flashes, just press “ ”or “ ” to adjust the hardness level( range: 1-10 ), if you don’t operate “...
- Page 15 the “Clean” mode, the beater motor begin to work, press the “ ”key, the clean pattern is off and stop rotating, the beater motor stop working, exit the Clean mode and the standby pattern is on. d. Standby Press “ ”, “STANDBY”...
- Page 16 f. defrost In standby mode, press the "Defrost" button, the "AUTO" and "CLEAN" icons flash, and the machine enters the defrost function. B. Fault and Alarm Description The screen Belt creep or electrical machine lost speed show“nl” The screen Approach switch breakdown or mixing electrical show“--”...
- Page 17 show“cl” TO solve the problem refer to the Trouble shooting guide C. The method of making ice cream 1. Pour the mix into the mix hopper, and make sure there isn’t any big solid in the mix so that the mix can flow into the freezing cylinder from the inlet hole of the feed tube smoothly.
- Page 18 Use & Maintenance Different machines must be used and maintained according to their different using conditions and environment conditions. ◆Washing refrigeration cylinders Clean the refrigeration cylinders once everyday for a longer useful life and for the health of customers. A.Cleaning methods are as follow: •...
- Page 19 1.Piston 9.Bearing sleeve for beater 2.O-ring 20X2.65 10. O-ring for dispensing door 3.Handle 11.flow plug 4.pin of handle 12.scraper 5.screw nut (down) 13.beater 6.screw nut (up) 14. O-ring for beater 7.Modelling cap 15. O-ring for piston 8.dispensing valve 16.New design middle piston d, Put the disassembled parts into the prepared food disinfection cleaning solution and clean them one by one, and check the bearing sleeve for beater, O-ring for Piston, O-ring for Dispenser Door, O-ring for Beater.
- Page 20 sleeve for beater, you should lubricate vaseline (lubricating vaseline onto the O-ring for beater, do not onto the beater’s end ), using the vaseline frequently can extend the service life of components. B.Cleaning machine cabinet Keep the machine cabinet clean, use wet towel to clean the cabinet, and do not flush the machine with water directly.
- Page 21 elongated, so it needs to be adjusted. Disconnected the main power of the machine, remove the back panel and side panels, adjust the tension bolt of beater motor and make sure the belt is in appropriate tension. Trouble shooting guide Problems Probable cause Remedy...
- Page 22 position does Repair or change the beater The beater motor broke not run motor The circuit breaker Find and solve the problem switch is open The tie wire of function Machine in Check and fasten the wire. switch is unfastened. clean position does There is some problem...
- Page 23 Repair or change the fan Fan motor do not run motor The capacitor of the fan Change the capacitor of fan motor broke motor The setting value of Increase the setting value hardness is too low Machine There is some problem non-stop Change the control panel with control panel.
- Page 24 Reassemble or change the Drawing piston leaking O-ring. Leakage Tighten the screws or Dispensing door leaking change the O-ring Fix well or change the gasket Drip tray leaking for beater Stop the machine, solve the Low voltage protection problem and restart 5 Buzzer rings minutes later.
- Page 25 Technical Support and E-Warranty Certificate www.vevor.com/support - 22 -...
Need help?
Do you have a question about the CK400PRO-A19 and is the answer not in the manual?
Questions and answers