Introduction; Jump Start - DigiTech VOCALISTPERF Manual

Introduction

Thank you and congratulations on your purchase of the Digitech Vocalist Performer. This vocal har-
mony product is a breakthrough in ease-of-use, sound quality and affordability. Whether you sing
for your own entertainment or for the entertainment of others, Performer can be your "singing part-
ner" who can effortlessy hit the high notes and provide full-sounding backup hour after hour.
Performer offers the latest vocal harmony technology that has made DigiTech the world leader in
natural-sounding vocal harmony processing. In addition, Performer features a high quality reverber-
ation effect to further enhance your vocals.
Performer's features include:
• Two assignable voices for harmony, automatic doubling and special effects
• Built-in stereo reverb with three preset types
• Stereo harmony and reverb output
• 50 user programs
• Part A and Part B switching
• Easy user interface
• Sound source for cue-in note and guitar tuning reference
• Optional microphone stand mounting bracket
• Optional DigiTech FS300 footswitch

Jump Start

1) Connect Performer as shown on page 6. The Signal LED will glow red dur-
ing the ~5 second power-up delay.
2) Press the Mute button so it lights and adjust the Harmony and Reverb knobs
to 12 O'Clock.
3) Sing into your mic and adjust the Input knob so that the Signal LED shows
red only on the loudest notes you will sing.
4) Sing a song you know. For a starting pitch, press the cue button.
The cue button volume is controlled by the Reverb Level knob.
5) You can change the harmony sound by using the buttons from the Harmony
group.
6) Select a different Key or Scale from the respective button groups.
Enjoy! Don't forget to read this whole manual to make the most of Performer.
1
••• •••