Introduction; Warranty - DigiTech STUDIO QUAD2 User Manual

2

INTRODUCTION

Congratulations, and thank you for your purchase of the DigiTech Studio Quad V2.
The Studio Quad V2 gives you four completely independent inputs and outputs driven by proven S-DISC™ technol-
ogy. The results are obvious: sparkling clean sound and endless combinations of effects and signal path routings.
Features include:
• Four independent 1/4" Inputs and Outputs
• 4 Effects at once
• 24 bit data path
• 180(Factory) 100(User) Programs
• Effects include: Reverbs, Choruses, Flangers, Auto-Panners, Tremolo, Intelligent Pitch Shifting, Delays (Analog
and Digital), Rotary Speaker Simulator, Compressor, and Noise Gate.

WARRANTY

1. The warranty registration card must be mailed within ten days after purchase date to validate the warranty.
2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and
workmanship under normal use and service.
3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence
of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts
and labor will be covered up to a period of one year. A Return Authorization number may be obtained from
DigiTech by telephone. The company shall not be liable for any consequential damage as a result of the produc-
t's use in any circuit or assembly.
4. Proof-of-purchase is considered to be the burden of the consumer.
5. DigiTech reserves the right to make changes in design, and make additions or improvements to this product
without incurring any obligation to install the same on products previously manufactured.
6. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor autho-
rizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall
DigiTech or its dealers be liable for special or consequential damages, or from any delay in the performance of
this warranty due to causes beyond their control.
DigiTech™, Studio Quad V2™, and S-DISC™ are registered trademarks of DOD Electronics Corporation.
IMPORTANT! The information contained in this manual is subject to change at any time without notification. Some
information in this manual may also be inaccurate due to undocumented changes in the product or operating system
since this version of the manual was completed. The information contained in this version of the manual supersedes all
previous versions.
Introduction
Studio Quad V2 User's Manual