Troubleshooting - DigiTech VOCALIST LIVE 4 Owner's Manual

Troubleshooting

I don't hear any sound coming from the Vocalist
• Make sure the power supply is plugged in to both the Vocalist Live 4 and the power outlet.
• Make sure the guitar amp, P.A. system, or mixer is plugged in and turned on.
• Make sure the guitar amp, P.A. system, or mixer volume levels aren't turned all the way
down.
• Make sure the guitar volume isn't turned all the way down, and the microphone isn't turned
off (if it has an on/off switch).
• Make sure the Mic/Line Input Level knob isn't turned all the way down.
• Make sure all the cables are completely plugged into their proper places (see pages 7
through 0 for instructions and diagrams).
The harmonies aren't tracking properly.
• Make sure the Guitar Signal LED is green or amber while playing (see Setting the Guitar
Level on page 3 for more information).
• Tune the guitar with the Vocalist Live 4 tuner (see page 2).
• Make sure you're not in Tuner mode while singing.
The guitar signal is too quiet.
• Turn up the volume on your guitar.
• Make sure the guitar cable is properly connected to the guitar and the Vocalist Live 4.
The guitar signal is too loud.
• Turn down the volume on your guitar.
• Turn down the Guitar Level knob.
The lead vocal is too quiet.
• Turn up the Vocal Level knob.
• Turn up the Mic/Line Input Level knob.
• If you're using a P.A. system or mixer, turn up the channel that the Vocalist Live 4 is con-
nected to, or turn up the master level (volume) controls.
• Try singing closer to the microphone.
The lead vocal is too loud.
• Turn down the Vocal Level knob.
• Turn down the Mic/Line Input Level knob.
• If you're using a P.A. system or mixer, turn down the channel that the Vocalist Live 4 is con-
nected to, or turn down the master level (volume) controls.
I don't hear any harmonies, or the harmonies are too quiet.
• Make sure the Harmony footswitch is pressed so that the LED just above it is lit.
• Turn up the Harmony Level knob.
• Make sure the Voicing parameter (in the Harmony row of the Effects Matrix) is not set to
OFF.
The harmonies are too loud.
• Turn down the Harmony Level knob.
Live 4.
®
25